AN91184 Datasheet, PDF (19/36 Pages) Ramtron International Corporation – Designing BLE Applications

PSoC® 4 BLE – Designing BLE Applications
18. Connect the Analog Mux Sequencer, Sequencing SAR ADC, and Analog Pin Components per the schematic
shown in Figure 22.
Note: All of the blue components are from the “Off-Chip” catalog. These are used for documentation purposes
only but can be used to make the schematic more instructive of what is on the hardware.
Figure 22. Schematic – Temperature Measurement
19. In the Pins tab of the design-wide resources window, connect the pins as shown in Figure 23.
Figure 23. Pins Tab of the Design-Wide Resources Window
www.cypress.com
Document No. 001-91184 Rev. *B
19