AN91184 Datasheet, PDF (11/36 Pages) Ramtron International Corporation – Designing BLE Applications

PSoC® 4 BLE – Designing BLE Applications
Figure 10. Temperature Measurement Characteristic
Similarly, update the remaining services and characteristics per Table 1. An “N/A” in the Descriptor column
means that the fields and the values refer to the characteristic, but not to the descriptor. For example, the field
Temperature Text Description belongs to the characteristic Temperature Type in the Health Thermometer
service, but the fields Lower Inclusive Value and Upper Inclusive Value belong to the descriptor Valid Range
of the characteristic Measurement Interval.
Table 1. Characteristic Configuration
Service
Characteristic
Temperature
Measurement
Temperature
Type
Health
Thermometer
Measurement
Interval
Measurement
Interval
Descriptor
N/A
N/A
N/A
Valid Range
Fields
Temperature Units
Flag
Value
Temperature Measurement
Value in units of degrees
Celsius
Temperature Text
Description
Body (general)
Measurement Interval 1
Lower Inclusive Value 1
Upper Inclusive Value 60
Remarks
The possible values are
defined by the Bluetooth
SIG. The BLE Component
provides an option to select
one of the possible values.
The possible values are
defined by the Bluetooth
SIG. The BLE Component
provides an option to select
one of the possible values.
User-defined
Units: seconds,
Range: 1-65535
User-defined
Units: seconds,
Range: 1-65535
User-defined
Units: seconds,
Range: 1-65535
www.cypress.com
Document No. 001-91184 Rev. *B
11