AN91184 Datasheet, PDF (13/36 Pages) Ramtron International Corporation – Designing BLE Applications

PSoC® 4 BLE – Designing BLE Applications
Figure 11. Device Name and Appearance
7. The Advertisement Settings under Peripheral Role will be left at their default values for this project.
8. Configure the Advertisement packet settings under Peripheral role per Table 3.
Table 3. Advertisement Packet Settings
Name
Local Name
Check Box Value
Enabled
Complete
Service UUID
Enabled
N/A
Service UUID > Health
Thermometer
Enabled
N/A
Service UUID > Device Information Enabled
N/A
Appearance
Enabled
N/A
Remarks
Transmits the complete name as a part of the advertisement
packet. You can send the shortened name as well by
selecting the number of characters to be sent.
Transmits Service UUIDs (universally unique identifier) as a
part of the advertisement packet.
Transmits the Health Thermometer Service UUID as a part of
the advertisement packet.
Transmits the Device Information Service UUID as a part of
the advertisement packet.
Transmits the Appearance value as a part of the
advertisement packet.
Figure
Figure 12
Figure 12
Figure 12
Figure 12
Figure 12
www.cypress.com
Document No. 001-91184 Rev. *B
13