AN91184 Datasheet, PDF (28/36 Pages) Ramtron International Corporation – Designing BLE Applications

PSoC® 4 BLE – Designing BLE Applications
3. Select Debug > Program, as shown in Figure 29. If there is only one kit connected to the PC, the programming
will start automatically. If multiple kits are present, PSoC Creator will prompt you to choose the kit to be
programmed.
Figure 29. Programming the Device
You can view the programming status on the PSoC Creator status bar (lower-left corner of the window), as shown in
Figure 30.
Figure 30. Programming Status
5 Application Testing
The Health Thermometer application can be tested using the CySmart Central Emulation Tool or the CySmart mobile
app.
5.1 CySmart Central Emulation Tool
You can use the CySmart Central Emulation Tool along with the CY5670 CySmart USB Dongle (BLE Dongle) to test
and verify the operation of a BLE Peripheral device.
Download the latest CySmart Central Emulation Tool from www.cypress.com/cysmart.
To verify the Health Thermometer application using the CySmart Central Emulation Tool, do the following:
1. Connect the BLE Dongle to the PC and start the CySmart Central Emulation Tool from Start > All Programs >
CySmart 1.1 > CySmart 1.1.
The CySmart Central Emulation Tool detects the BLE Dongle connected to the USB drive.
www.cypress.com
Document No. 001-91184 Rev. *B
28