AN91184 Datasheet, PDF (27/36 Pages) Ramtron International Corporation – Designing BLE Applications

PSoC® 4 BLE – Designing BLE Applications
4.4 Build and Program the Device
1. Select Build > Build AN91184 to build and compile the firmware, as shown in Figure 27. The project should
build without warnings or errors.
Figure 27. Build Project
2. Plug the PSoC 4 BLE module (red module) to the BLE Pioneer baseboard, and then connect the kit to your PC
using the USB Standard-A to Mini-B cable (see Figure 28). Allow the USB enumeration to complete on the PC.
Figure 28. Connect BLE Pioneer Baseboard to PCB Using a USB Cable
www.cypress.com
Document No. 001-91184 Rev. *B
27