HYS72D32300 Datasheet, PDF (14/50 Pages) Qimonda AG – 184-Pin Registered Double Data Rate SDRAM Module

Internet Data Sheet
HYS72D[128/64/32]3xx[G/H]BR–[5/6/7]–C
Registered Double Data Rate SDRAM
3.3
Current Specifications
This chapter describes the Specifications.
Product Type
TABLE 11
I_DD Specification for HYS72D[128/64/32]3xxx[G/H]BR–5–C
Unit Note/ Test Conditions^{1) 2)}
Organization
256 MB
512 MB
512 MB
×72
×72
×72
1 Rank
1 Rank
2 Ranks
–5
–5
–5
Symbol
Typ. Max. Typ. Max. Typ. Max.
I_DD0
1140 1370 2070 2480 1780 2080 mA ³⁾
I_DD1
1360 1600 2380 2800 2000 2310 mA ³⁾⁴⁾
I_DD2P
390
440
730
790
730
790
mA
5)
I_DD2F
880
990
1450 1620 1450 1620 mA ⁵⁾
I_DD2Q
540
650
1020 1200 1020 1200 mA ⁵⁾
I_DD3P
470
560
890
720
890
1020 mA ⁵⁾
I_DD3N
950 1080 1590 1780 1590 1780 mA ⁵⁾
I_DD4R
1400 1600 2470 2800 2040 2310 mA ³⁾⁴⁾
I_DD4W
1450 1650 2560 2890 2090 2350 mA ³⁾
I_DD5
1630 2120 3190 4130 2270 2830 mA ³⁾
I_DD6
330
370
640
700
640
700
mA
5)
I_DD7
2530 2950 4720 5500 3170 3660 mA ³⁾⁴⁾
1) Test condition for maximum values: V_DD = 2.7 V, T_A = 10 °C
2) Module I_DD is calculated on the basis of component I_DD and includes Register and PLL
3) The module I_DD values are calculated from the component I_DD datasheet values are: n * I_DD × [component] for single bank modules
(n: number of components per module bank) n * I_DD × [component] + n * I_DD3N [component] for two bank modules (n: number of
components per module bank)
4) DQ I/O (I_DDQ) currents are not included into calculations: module IDD values will be measured differently depending on load conditions
5) The module I_DD values are calculated from the component I_DD datasheet values are: n * I_DD × [component] for single bank modules
(n: number of components per module bank)2 * n * I_DD × [component] for single two bank modules (n: number of components per module
bank)
Rev. 1.32, 2007-03
14
03292006-Q22P-G7TH