SAA8116 Datasheet, PDF (8/60 Pages) NXP Semiconductors – Digital PC-camera signal processor including microcontroller and USB interface

Philips Semiconductors
Digital PC-camera signal processor including
microcontroller and USB interface
Product specification
SAA8116
SYMBOL
PIN⁽¹⁾ BALL⁽²⁾ TYPE⁽³⁾
DESCRIPTION
V_DD4
76
B11
P supply voltage 4 for input buffers and predrivers
GND4
77
A11
P ground 4 for input buffers and predrivers
AGND2
78
C10
P analog ground 2 for ATX transceiver
ATXDN
79
A10
I/O negative driver of the differential data pair input/output (ATX)
ATXDP
80
A9
I/O positive driver of the differential data pair input/output (ATX)
V_DDA2
DELAYATT
81
B9
82
C8
P analog supply voltage 2 for ATX transceiver
O delayed attach control output; connected with pull-up resistor on ATXDP
(USB)
RESERVED2 83
A8
I test pin 2 (should be connected to GND)
RESERVED3 84
B8
I test pin 3 (should be connected to GND)
XSEL
85
C7
I crystal selection input
PSEL
86
A7
I POR selection input
V_DD5
GND5
87
B7
P supply voltage 5 for output buffers
88
B6
P ground 5 for output buffers
FULLPOWER 89
A6
O full power signal output (active LOW)
FH2
90
C6
O horizontal CCD transfer pulse output
FH1
91
B5
O horizontal CCD transfer pulse output
RG
92
A5
O reset output for CCD output amplifier gate
ROG
93
C5
O vertical CCD load pulse output
SMP
94
B4
O switch mode pulse output for CCD supply
H
95
A4
O horizontal synchronization pulse output
V
96
C4
I/O vertical synchronization pulse input/output
CRST
97
B3
O CCD charge reset output for shutter control
FV4
98
A3
O vertical CCD transfer pulse output
V_DD6
GND6
99
C3
100
A2
P supply voltage 6 for output buffers
P ground 6 for output buffers
Notes
1. Pinning related to LQFP100 package.
2. Pinning related to TFBGA112 package.
3. I = input; O = output and P = power supply.
2001 May 04
8