SAA8116 Datasheet, PDF (32/60 Pages) NXP Semiconductors – Digital PC-camera signal processor including microcontroller and USB interface

Philips Semiconductors
Digital PC-camera signal processor including
microcontroller and USB interface
Product specification
SAA8116
Table 23 Register PPG_V_INV (address: 0x63H)
BIT
76543210
FV4_INV
0
negative pulses
1
positive pulses
FV3_INV
0
negative pulses
1
positive pulses
FV2_INV
0
positive pulses
1
negative pulses
FV1_INV
0
positive pulses
1
negative pulses
ROG1_INV; note 1
0
negative pulses
1
positive pulses
ROG2_INV; note 1
0
negative pulses
1
positive pulses
X X reserved
PARAMETER
Note
1. ROG1_INV and ROG2_INV are related to ROG_SEL (see Table 41; PIN_CONFIG_0[0]). If ROG_SEL = 0, then
ROG2_INV is activated (with Sony or Sharp CCD applications) and ROG1_INV is disabled. If ROG_SEL = 1, then
ROG1_INV is activated (with Panasonic CCD applications) and ROG2_INV is disabled.
2001 May 04
32