83C751 Datasheet, PDF (6/24 Pages) NXP Semiconductors – 80C51 8-bit microcontroller family 2K/64 OTP/ROM, I2C, low pin count

Philips Semiconductors
80C51 8-bit microcontroller family
2K/64 OTP/ROM, I²C, low pin count
Product specification
83C751/87C751
ABSOLUTE MAXIMUM RATINGS^{1, 2}
PARAMETER
RATING
UNIT
Storage temperature range
–65 to +150
°C
Voltage from V_CC to V_SS
Voltage from any pin to V_SS (except V_PP)
Power dissipation
–0.5 to +6.5
V
–0.5 to V_CC + 0.5
V
1.0
W
Voltage on V_PP pin to V_SS
0 to +13.0
V
Maximum I_OL per I/O pin
10
mA
NOTES:
1. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and
functional operation of the device at these or any conditions other than those described in the AC and DC Electrical Characteristics section
of this specification is not implied.
2. This product includes circuitry specifically designed for the protection of its internal devices from the damaging effects of excessive static
charge. Nonetheless, it is suggested that conventional precautions be taken to avoid applying greater than the rated maxima.
DC ELECTRICAL CHARACTERISTICS
T_amb = 0°C to +70°C or –40°C to +85°C, V_CC = 5V ±10% for 87C751, V_CC = 5V ±10% for 83C751, V_SS = 0V¹
SYMBOL
PARAMETER
TEST CONDITIONS
LIMITS
MIN
MAX
V_IL
V_IH
V_IH1
V_IL1
V_IH2
V_OL
V_OL1
V_OH
V_OL2
C
Input low voltage, except SDA, SCL
Input high voltage, except X1, RST
Input high voltage, X1, RST
SDA, SCL, P0.2
Input low voltage
Input high voltage
Output low voltage, ports 1 and 3
Output low voltage, port 0.2
Output high voltage, ports 1 and 3
Port 0.0 and 0.1 (I²C) – Drivers
Output low voltage
Driver, receiver combined:
Capacitance
I_OL = 1.6mA²
I_OL = 3.2mA²
I_OH = –60µA
I_OH = –25µA
I_OH = –10µA
I_OL = 3mA
(over V_CC range)
–0.5
0.2V_CC+0.9
0.7V_CC
0.2V_DD–0.1
V_CC+0.5
V_CC+0.5
–0.5
0.7V_CC
2.4
0.75V_CC
0.9V_CC
0.3V_CC
V_CC+0.5
0.45
0.45
0.4
10
I_IL
I_TL
I_LI
R_RST
C_IO
I_PD
V_PP
Logical 0 input current, ports 1 and 3
Logical 1 to 0 transition current, ports 1 and 3³
Input leakage current, port 0
Internal pull-down resistor
Pin capacitance
Power-down current⁴
V_PP program voltage (for 87C751 only)
V_IN = 0.45V
V_IN = 2V (0 to 70°C)
V_IN = 2V (–40 to +85°C)
0.45 < V_IN < V_CC
Test freq = 1MHz,
T_amb = 25°C
V_CC = 2 to V_CC max
V_SS = 0V
V_CC = 5V±10%
T_amb = 21°C to 27°C
25
12.5
–50
–650
–750
±10
175
10
50
13.0
I_PP
Program current (for 87C751 only)
V_PP = 13.0V
50
I_CC
Supply current (see Figure 2)
NOTES TO DC ELECTRICAL CHARACTERISTICS ON NEXT PAGE.
UNIT
V
V
V
V
V
V
V
V
V
V
V
pF
µA
µA
µA
µA
kΩ
pF
µA
V
mA
1998 May 01
6