MN101EFC3 Datasheet, PDF (7/46 Pages) Panasonic Semiconductor – 8-bit Single-chip Microcontroller

MN101EFC3/D3 Series
8-bit Single-chip Microcontroller
PubNo. 216C3-014E
- Real-time control
Timer (PWM) output is controlled among the three values: “Fixed to High”, “Fixed to Low”, or
“Hi-Z” at falling edge of external interrupt 0 (IRQ0)
Timer 8 (General-purpose 16-bit timer)
- Clock source
fpll-div, fs, external clock, timer A output, timer 6 compare match cycle divided by 1, 2, 4, 16
- Hardware configuration
Double-buffered compare register (x2)
Double-buffered input capture register (x1)
Timer interrupt (x2 vector)
- Timer function
Square wave output (Timer pulse output), high-precision PWM output (cycle/duty continuous
changeable) can be output to large current pin TM8IOB, event count, pulse width measurement,
input capture function (both edges operable)
32-bit cascade connection (connected with timer 7), 32-bit PWM output,
Input capture is available in 32-bit cascade
Timer 9 (Motor control 16-bit timer)
- Clock source
fpll-div, fs, external clock, Timer A output divided by 1, 2, 4, 16
- Hardware configuration
Double-buffered compare register (x2)
Timer interrupt (x3 vector)
- Timer function
Square wave output (Timer pulse output), switchable to large current output, complementary 3-
phase PWM output,
Triangle wave and saw tooth wave are supported, dead time insertion available, event count
- Pin output control
PWM output control is possible by external interrupt 0 to 4 (IRQ 0 to 4)
("Hi-z", output data fixed)
Timer A (baud rate timer)
Clock output for peripheral functions
- Clock source
fpll-div divided by 1/1, 2, 4, 8, 16, 32, and fs divided by 2, 4
24H timer
- Clock source (Usable frequency)
fpll (4 MHz, 4.19 MHz, 5 MHz, 8 MHz, 8.38 MHz, 10 MHz, 16 MHz, 16,77 MHz,
20 MHz) fx (32.768 kHz), frc (20 MHz, 16 MHz), frcs (30 kHz)
- Hardware configuration
0.5 seconds counter, minute counter, hour counter
Alarm compare register (in 0.5 seconds, in minutes, in hours) (x1)
Timer interrupt (x2 vector)
- Timer function
Interval function (interrupts every 0.5 seconds, 1 second, 1 minute, 1 hour, 24 hours)
Alarm function
Publication date: November 2015