MN101EFC3 Datasheet, PDF (28/46 Pages) Panasonic Semiconductor – 8-bit Single-chip Microcontroller

MN101EFC3/D3 Series
8-bit Single-chip Microcontroller
PubNo. 216C3-014E
1.5.2 Operating Conditions
B. Operating Conditions
Parameter
Symbol
Conditions
Power supply voltage *5
B1
B2
B3
B4 _{Power supply voltage}
B5
B6
B7
B8
RAM retention power
supply voltage
Operating speed *6
B9
B10
B11
B12 Instruction execution
time fs
B13
B14
B15
V_DD1
V_DD2
V_DD3
V_DD4
V_DD5
V_DD6
V_DD7
V_DD8
fs  20 MHz *7
fs  10 MHz *8
fs  8 MHz *7
fs  8 MHz *7,
When using internal oscillation *9
fs  4 MHz *8
fs  4 MHz *8,
When using internal oscillation *10
fs = 16.384 kHz
During STOP mode
t_c1
V_DD50 = 2.7 V to 5.5 V *7
t_c2
V_DD50 = 2.7 V to 5.5 V *8
t_c3
V_DD50 = 1.8 V to 5.5 V *7
t_c4
V_DD50 = 2.0 V to 5.5 V *7,
When using internal oscillation *9
t_c5
V_DD50 = 1.8 V to 5.5 V *8
t_c6
V_DD50 = 2.0 V to 5.5 V *8,
When using internal oscillation *10
t_c7
V_DD50 = 1.8 V to 5.5 V
V_SS=0 V
Ta = -40 C to +85 C
Rating
Unit
MIN TYP MAX
2.7
5.5
2.7
5.5
1.8
5.5
2.0
5.5
1.8
5.5
V
2.0
5.5
1.8
5.5
1.8
5.5
0.05
0.10
0.125
0.125
s
0.25
0.25
61.0
*5 fs : Machine clock frequency
*6 tc1 to 2 : when the machine clock is selected from external high-speed oscillation, internal high-speed oscillation, or both the oscil-
lations multiplied by PLL.
tc7 : when the machine clock is selected from external low-speed oscillation or internal low-speed oscillation.
*7 When bp2 of the HANDSHAKE register (0x03F06) is set to “1'b1”
*8 When bp2 of the HANDSHAKE register (0x03F06) is set to “1'b0”
*9 When setting frc=16 MHz, fs=frs/2
*10 When setting frc=16 MHz, fs=frs/4
Publication date: November 2015