MN101EFC3 Datasheet, PDF (10/46 Pages) Panasonic Semiconductor – 8-bit Single-chip Microcontroller

MN101EFC3/D3 Series
8-bit Single-chip Microcontroller
PubNo. 216C3-014E
Full duplex UART (Baud rate timer: selected from timer 0 to 4, or timer A)
- Parity check, overrun error/framing error are detected
- Transfer bits 7 to 8 are selectable
Serial 4 (Multi master IIC / Synchronous serial interface)
Synchronous serial interface
- Transfer clock source
fpll-div/2, fpll-div/4, fpll-div/8, fpll-div/32, fs/2, fs/4,
Timer 0 to 4, Timer A output divided by 1, 2, 4, 8, 16, External clock
- MSB/LSB first selectable, 1 to 8 bits of arbitrary transfer
- Continuous transmission, continuous reception, continuous transmission and reception are
available.
Multi master IIC
- 7, 10-bit slave address is settable
- General call communication mode is supported
- Auto reset circuit
- Low voltage detection circuit
- Clock monitoring function
- LED driver: 6 sets
- LCD driver
LCD driver pins
Segment output: Max. 32 pins (SEG0-31)
SEG0-31 can be switched to I/O port in pins.
(Note) At reset, SEG0-31 are input ports.
Common output pins: 4 pins
COM0-3 can be switched to I/O port in pins.
Display mode selection
Static
1/2 duty, 1/2 bias
1/3 duty, 1/3 bias
1/4 duty, 1/3 bias
Publication date: November 2015