MT9P001 Datasheet, PDF (7/48 Pages) ON Semiconductor – CMOS Digital Image Sensor

Figure 2: Typical Configuration (Connection)
MT9P001: 1/2.5-Inch 5Mp Digital Image Sensor
Functional Overview
VDD_IO^2,3 VDD2,3 VAA2,3
From
controller
Master
clock
SADDR
RESET_BAR
STANDBY_BAR
1µF
SCLK
SDATA
TRIGGER
EXTCLK
OE
DOUT[11:0]
PIXCLK
FV
LV
STROBE
To
controller
Figure 3:
Notes:
1. A resistor value of 1.5k is recommended, but may be greater for slower two-wire speed.
2. All power supplies should be adequately decoupled.
3. All DGND pins must be tied together, as must all AGND pins, all VDD_IO pins, and all VDD pins.
48-Pin iLCC 10 x 10 Package Pinout Diagram (Top View)
6 5 4 3 2 1 48 47 46 45 44 43
FRAME_VALID ⁷
42 DOUT8
LINE_VALID ⁸
41 DOUT7
STROBE ⁹
40 DOUT6
DGND ¹⁰
39 _{VDD_IO}
VDD_IO 11
38 _DOUT5
VDD 12
37 _DOUT4
SADDR 13
36 _DOUT3
STANDBY_BAR ¹⁴
TRIGGER 15
35 _DOUT2
34 _DOUT1
RESET_BAR 16
33 _DOUT0
OE ¹⁷
32 _PIXCLK
NC ¹⁸
31 _EXTCLK
19 20 21 22 23 24 25 26 27 28 29 30
MT9P001_DS Rev. L 4/15 EN
7
©Semiconductor Components Industries, LLC,2015.