MT9P001 Datasheet, PDF (47/48 Pages) ON Semiconductor – CMOS Digital Image Sensor

MT9P001: 1/2.5-Inch 5Mp Digital Image Sensor
Revision History
• Update "Signal Chain and Datapath" on page 34
• Add "Test Patterns" on page 36
• Update Figure 26: “Typical Spectral Characteristics,” on page 38
• Update Table 16, “Two-Wire Serial Bus Characteristics,” on page 55
• Update "Electrical Specifications" on page 50
• Update Figure 32: “48-Pin iLCC Package Outline Drawing,” on page 61
Rev. C, Advance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9/05
• Changed 10-bit to 12-bit
• Update Table 1, “Key Performance Parameters,” on page 1
• Add Table 2, “Available Part Numbers,” on page 1
• Update FIgure 1, on page 6
• Update Figure 2, Typical Configuration (Connection), on page 7
• Update Figure 4, 48-Pin iLCC 10x10 Package Pinout Diagram (Top View), on page 3
• Update Table 3, “Pin Description,” on page 8
• Update "Pixel Array Structure" on page 9
• Update Table 5, “Pixel Type by Row,” on page 9
• Update Figure 4, Pixel Array Description, on page 10
• Update "Standby and Chip Enable" on page 19
• Update Table 8, “Register List and Default Values,” on page 21
• Update Table 9, “Register Description,” on page 22
• Update "Full-Array Readout" on page 22
• Update Figure 15, Bin 4x, on page 34
• Update "Mirror" on page 27
• Remove Column Mirror Mode with Binning Figure
• Update Figure 16, Row Time, on page 36
• Update "Frame Time" on page 35
• Update Figure 17, Row Time with Row Bin 2x, on page 36
• Update "LINE_VALID and FRAME_VALID" on page 37
• Update "Restart" on page 29
• Update "Exposure" on page 40
• Update "Operating Modes" on page 41
• Update "Gain" on page 34
• Update Table 15, “Gain Increment Settings,” on page 34
• Add Figure 26, Typical Spectral Characteristics, on page 38
• Add Table 16, “Two-Wire Serial Bus Characteristics,” on page 55
• Add Table 18, “I/O Timing Characteristics,” on page 42
• Update Table 18, “DC Electrical Characteristics,” on page 58
• Add Table 20, “Power Consumption,” on page 44
• Update Table 21, “Absolute Maximum Ratings,” on page 44
Rev. B, Advance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7/05
• Change 12-bit ADC and DOUT(11:0) to 10-bit ADC and DOUT(9:0)
• Added Figure 2: Typical Configuration (Connection) on page 7
• Added Figure 4: 48-Pin iLCC 10x10 Package Pinout Diagram (Top View) on page 3
• Added TEST, RSVD and NC to Table 3: Pin Description on page 8
• Updated "Pixel Data Format" on page 9
MT9P001_DS Rev. L 4/15 EN
47
©Semiconductor Components Industries, LLC,2015.