MT9P001 Datasheet, PDF (24/48 Pages) ON Semiconductor – CMOS Digital Image Sensor

MT9P001: 1/2.5-Inch 5Mp Digital Image Sensor
Features
Skipping can be enabled separately for rows and columns. To enable skip mode, set
either or both of Row_Skip and Column_Skip to the number of pixel pairs that should be
skipped for each pair used in the output image. For example, to set column skip 2X
mode, set Column_Skip to “1.”
The size of the output image is reduced by the skip mode as shown in the following two
equations:
W = 2 x ceil((Column_Size + 1) / (2 x (Column_Skip + 1)))
H = 2 x ceil((Row_Size + 1) / (2 x (Row_Skip + 1)))
Figure 15: Pixel Readout (no skipping)
X incrementing
Figure 16: Pixel Readout (Column Skip 2X)
X incrementing
MT9P001_DS Rev. L 4/15 EN
24
©Semiconductor Components Industries, LLC,2015.