E3X-DA11-N Datasheet, PDF (7/36 Pages) Omron Electronics LLC – The Ultimate Fiber Amplifier for Maximum Ease of Use and High Performance

E3X-DA-N
Type
Standard
models
Monitor-
output
models
Mark-detecting models
Infrared
models
Output NPN
type output
E3X
-DA11-N
E3X
-DA21-N
E3X
-DAB11-N
E3X
-DAG11-N
E3X
-DAH11-N
Item
PNP
output
E3X
-DA41-N
E3X
-DA51-N
E3X
-DAB41-N
E3X
-DAG41-N
E3X
-DAH41-N
Ambient temperature
Operating:Groups of 1 to 3 Amplifiers: −25 to 55°C
Groups of 4 to 11 Amplifiers: −25 to 50°C
Groups of 12 to 16 Amplifiers: −25 to 45°C
Storage:−30 to 70°C (with no icing or condensation)
Ambient humidity
Operating and storage: 35% to 85% (with no condensation)
Insulation resistance 20 MΩ min. (at 500 VDC)
Dielectric strength
1,000 VAC at 50/60 Hz for 1 min
Vibration resistance
(destruction)
10 to 55 Hz with a 1.5-mm double amplitude for 2 h each in X, Y and Z directions
Shock resistance
(destruction)
500m/s², for 3 times each in X, Y and Z directions
Degree of protection IEC IP50 (with Protective Cover attached)
Connection method
Weight (packed state)
Case
Materi-
al
Cover
Pre-wired (standard cable length: 2 m)
Approx. 100 g
Polybutylene terephthalate (PBT)
Polycarbonate
Accessories
Instruction sheet
Water-
resistant
models
E3X
-DA11V
E3X
-DA41V
Twin-output
models
E3X
-DA11TW
E3X
-DA41TW
IEC IP66 (with
Protective
Cover
attached)
IEC IP50 (with
Protective
Cover
attached)
Approx. 110 g Approx. 100 g
Polyethersulfo
ne
Amplifiers with Connectors
(Specifications different to those for Pre-wired Amplifiers)
Type
Standard
models
Monitor-out-
put models
Mark-detecting models
Output
type
Item
NPN
output
PNP
output
E3X-DA6
E3X-DA8
E3X-DA7
E3X-DA9
E3X-DAB6
E3X-DAB8
E3X-DAG6
E3X-DAG8
Connection method Standard connector
Weight (packed state) Approx. 55 g
* The dielectric strength for water-resistant models is 500 VAC at 50/60 Hz for 1 min.
Infrared
models
E3X-DAH6
E3X-DAH8
Water-
resistant
models*
E3X
-DA14V
E3X
-DA44V
M8 connector
Approx. 65 g
Twin-output
models
E3X
-DA6TW
E3X
-DA8TW
Standard
connector
Approx. 55 g
Connectors
Item
Model
E3X-CN11/21/22
E3X-CN12
Rated current
Rated voltage
Contact resistance
2.5 A
50 V
20 mΩ max. (20 mVDC max., 100 mA max.)
The figure is for connection to the Amplifier and the adjacent
Connector. It does not include the conductor resistance of the cable.
No. of insertions
(durability)
50 times
The figure for the number of insertions is for connection to the
Amplifier and the adjacent Connector.
Material
Housing
Contacts
Polybutylene terephthalate (PBT)
Phosphor bronze/gold-plated nickel
Weight (packed state) Approx. 55 g
Approx. 25 g
Mobile Console
Item Model
E3X-MC11
Power supply Charged with AC
voltage
adapter
Connection
method
Connected via adapter
Weight
Approx. 580 g
(packed state) (Console only: 120 g)
Refer to Instruction Manual provided
with the Mobile Console for details.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
7