E3X-DA11-N Datasheet, PDF (20/36 Pages) Omron Electronics LLC – The Ultimate Fiber Amplifier for Maximum Ease of Use and High Performance

E3X-DA-N
4 Setting Functions in SET Mode
Set mode selector
to SET.
SET
Digital incident level display
Teaching
Four types of sensitivity settings are available. Refer to page 22
for details.
MODE
2s
MODE
2s
MODE
2s
MODE
2s
MODE
2s
B
A
Sensing function Displayed as "F."
Standard (factory-set)
TEACH
Super-long distance
TEACH
Super-high speed
TEACH
Timer function Displayed as "t."
0 (Factory-set)
TEACH
200
TEACH
Adjustable in 1-ms units
for 0 to 20 ms and in 5-ms
units for 25 ms or higher.
Monitor Focus
B
A
Available with: E3X-DA21-N
E3X-DA51-N
E3X-DA7
E3X-DA9
MODE
2s
Setting upper limit Alternates between
for monitoring "A-UP" and setting value.
(Factory setting)
Alternates
TEACH
In units of 100
from 4,000.
Alternates
TEACH
Alternates
Flashing setting Displayed as "L."
OFF (Factory-set)
TEACH
ON
TEACH
Hold setting
Displayed as "H."
TEACH
Alternates
TEACH
Note: It is not possible to set an upper limit
that is lower than the lower limit.
MODE
Setting lower limit Alternates between
for monitoring "A-LO" and setting value.
OFF (Factory-set)
TEACH
Peak
TEACH
(Factory setting)
Alternates
TEACH
In units of
100 from 0
Alternates
Bottom
TEACH
Display orientation setting Reversing display
Standard (factory-set)
TEACH
Reverse
TEACH
TEACH
Alternates
TEACH
Alternates
TEACH
Note: It is not possible to set an lower limit
that is lower than the lower limit.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
20