E3X-DA-S Datasheet, PDF (18/28 Pages) Omron Electronics LLC – Digital Fiber Sensors

E3X-DA-S
6 Convenient Functions
6-1. Setting the Digital Display to Zero (Zero Reset)
The incident light level on the main display can be set to 0.
The incident light level and the threshold will both be
shifted. This is useful when you want to set the reference
display to zero.
✽ Change the function to 0RST (zero reset) with the MODE Key.
The default setting is PTUN.
➜Refer to 5. Setting Functions on page 16.
Set the SET/RUN Mode
Selector Switch to RUN.
RUN
Factory setting
MODE
3s
To return to original value for incident light level:
Set the SET/RUN Mode
Selector Switch to RUN.
RUN
Factory setting
DOWN
MODE
✽1
Press
both
for 3 s.
6-2. Locking the Keys (Key Lock)
All key operations can be disabled.
Set the SET/RUN Mode
Selector Switch to RUN.
RUN
✽2
UP
MODE
Press
both
for 3 s.
Factory setting
LOC
ON
“LOC ON” will flash twice
and key operations will be
disabled.
To release the lock:
Set the SET/RUN Mode
Selector Switch to RUN.
RUN
Factory setting
✽2
UP
MODE
Press
both
for 3 s.
LOC
OFF
“LOC OFF” will flash twice
and key operations will be
enabled.
✽ If a key is pressed while key operations are locked, “LOC ON” will
flash twice on the display to
indicate that key operations have
been disabled.
✽1. Press the DOWN Key right after pressing the MODE Key.
✽2. Press the UP Key right after pressing the MODE Key.
6-3. Resetting Settings (Initial Reset or User Reset)
All settings can be returned to the factory defaults or to
user-saved settings.
Set the SET/RUN Mode
Selector Switch to SET.
SET
UP
DOWN
Press
both
for 5 s.
RST
INIT
MODE
RST
UP
DOWN
USER
MODE
USER
YES?
USER
NO?
MODE
UP
DOWN
MODE
Perform user reset.
Operation canceled.
(The steps within the dotted lines can be used if settings have
been saved by the user.)
INIT
NO?
INIT
YES?
MODE
UP
DOWN
MODE
Operation canceled.
Settings initialized.
Saving User Settings
The current settings can be saved.
Set the SET/RUN Mode
UP
Selector Switch to SET.
SET
MODE
Press
both
for 5 s.
SAVE
YES?
SAVE
NO?
MODE
UP
DOWN
MODE
The current settings are saved. Operation canceled.
18