E3X-DA-S Datasheet, PDF (12/28 Pages) Omron Electronics LLC – Digital Fiber Sensors

E3X-DA-S
E3X-DA@R-S (@: 21/51/7/9)
Fiber Unit
Amplifier Unit
E3X-DA@R-S (@: 21/51/7/9)
Detection without background interference (Convergent-reflective)
Sensing distance (unit: mm)
Sensing
method
Sensing
direction
Size
Model
Tough mode
High-resolution
mode
Standard
mode
High-speed
mode
Reflective
models
Flat view
Top view
Flat view
Standard
Small
---
E32-L16-N 2M ^✽
E32-L24S 2M ^✽
E32-L25L 2M ^✽
E32-L24L 2M ^✽
0 to 15
0 to 4
5.4 to 9 (center 7.2)
2 to 6 (center 4)
✽ If operation is affected by the background, perform power tuning to reduce the amount of light that is received.
Super-high-
speed mode
0 to 12
Fiber Unit
Amplifier Unit
E3X-DA@R-S (@: 21/51/7/9)
Detection of transparent objects (Retro-reflective)
Sensing distance (unit: mm)
Sensing
method
Type
Model
Tough mode
High-resolution
mode
Standard
mode
High-speed Super-high-
mode
speed mode
Retrore-
flective
models
Square
Small
Film detection ^✽2
E32-R16 5M + E39-R1 (attached) ^✽1
E32-R21 2M + E39-R3 (attached) ^✽1
E32-C31 2M + E39-F3R+E39-RP37 ^✽1
E32-C31 2M + E39-F3R+E39-RSP1 ^✽1
150 to 1,500
10 to 250
250
200
150
100
50
600
300
225
150
75
✽1. When using a highly reflective object, light reflected from the object may affect the sensor.
✽2. The effect may be small due to the film. Also, stable detection may not be possible when there is a sensing object directly in front of the Lens
Unit. Be sure to check operation in advance.
Fiber Unit
Amplifier Unit
E3X-DA@R-S (@: 21/51/7/9)
FPD / Semiconductor / Solar battery industry
Sensing distance (unit: mm)
Sensing
method
Application
Operating
temperature
Model
Tough mode
High-resolution
mode
Standard
mode
High-speed Super-high-
mode
speed mode
Glass detection
E32-L16-N 2M ^✽
0 to 15
0 to 12
Glass substrate
alignment
70°C
300°C
E32-L16-N 2M ^✽
E32-A08 2M ^✽
E32-A08H2 3M ^✽
0 to 15
10 to 20
10 to 20
0 to 12
Reflective
models ^{Glass substrate}
mapping
70°C
150°C
300°C
E32-A09 2M
E32-A09H 2M
E32-A09H2 2M
15 to 38
15 to 38
20 to 30
60°C
E32-L11FP 5M
8 to 20 mm from end of lens (recommended: 11 mm)
WET process
70°C
E32-L12FS 5M
8 to 20 mm from end of lens (recommended: 11 mm)
85°C
E32-L11FS 5M
8 to 20 mm from end of lens (recommended: 11 mm)
Through-
beam
models
Wafer mapping
70°C
E32-A03 2M
E32-A03-1 2M
E32-A04 2M
E32-A04-1 2M
1,610
1,150
890
600
250
1,610
1,150
890
600
250
640
460
340
225
100
640
460
340
225
100
✽ If operation is affected by the background, perform power tuning to reduce the amount of light that is received.
Fiber Unit
Amplifier Unit
E3X-DA@R-S (@: 21/51/7/9)
Liquid-level detection model
Sensing distance (unit: mm)
Sensing
method
Sensing
direction
Pipe diameter
Model
Tough mode
High-resolution
mode
Standard
mode
High-speed Super-high-
mode
speed mode
No limit
E32-D36T 5M ^✽
Applicable pipe: Transparent (no restriction on diameter)
Reflective ^{Mounted to pipe}
models
φ8 to 10mm
E32-L25T 2M
Applicable pipe: Transparent pipe with diameter of 8 to 10 mm,
recommended pipe wall thickness: 1 mm
Wet
---
E32-D82F1 4M ^✽
Wet model
✽ If a high level of light is received, perform power tuning to reduce the amount of light that is received.
For information on Fiber Units, refer to the Fiber Sensors Best Selection Catalog (Cat. No. E353).
12