|
TDA8295 Datasheet, PDF (60/77 Pages) NXP Semiconductors – Digital global standard low IF demodulator for analog TV and FM radio | |||
|
◁ |
NXP Semiconductors
TDA8295
Digital global standard low IF demodulator for analog TV and FM radio
Table 68. Characteristics â¦continued
Power supplies 3.3 V, 1.2 V; Tamb = 25 °C; PC / SC1 for L and M = 10 dB, all others 13 dB; residual picture carrier for L = 3 %,
all others 10 %; FM/AM modulation = 54 %, 1 kHz modulation frequency; measured in application PCB (see Figure 12) with
16 MHz crystal frequency, loaded with 75 ⦠(CVBS) and 1 k⦠(SSIF/audio). Values are meant for âeasy programmingâ
settings (recommended) except internal mono audio and IF demodulation. The low IF spectrum is delivered by a professional
downconverter.
Symbol
Parameter
Conditions
Min
Typ
Max Unit
(S/N)w(AF)
AF weighted signal-to-noise
ratio
via internal mono sound
demodulator;
âITU-R BS.468-4â; FM mode
related to 27 kHz deviation
before pre-emphasis; 10 %
residual PC; SC1
black picture
54
58
- dB
ï¬at ï¬eld white picture
53
57
- dB
6 kHz sine wave picture
52
56
- dB
250 kHz square wave
52
56
- dB
picture
crosshatch picture
52
56
- dB
color bar picture
54
58
- dB
via internal mono sound
demodulator;
âITU-R BS.468-4â; AM;
m = 54 %; 3 % residual PC;
SC1
black picture
43
45
- dB
ï¬at ï¬eld white picture
43
46
- dB
color bar picture
43
46
- dB
via internal mono sound
47
demodulator;
âITU-R BS.468-4â;
FM Radio mode
51
- dB
TDA8295_1
Product data sheet
Rev. 01 â 4 February 2008
© NXP B.V. 2008. All rights reserved.
60 of 77
|
▷ |