|
TDA8295 Datasheet, PDF (27/77 Pages) NXP Semiconductors – Digital global standard low IF demodulator for analog TV and FM radio | |||
|
◁ |
NXP Semiconductors
TDA8295
Digital global standard low IF demodulator for analog TV and FM radio
9.3.5 Picture and sound carrier DTO
Table 21. DTO_PC_LOW, DTO_PC_MID and DTO_PC_HIGH register (address 09h to 0Bh) bit description
Legend: * = default value.
Address Register
Bit Symbol
Access Value Description
09h
DTO_PC_LOW 7 to 0 DTO_PC[7:0] R/W 85h* With the digitally tuned picture carrier oscillator
0Ah
DTO_PC_MID 7 to 0 DTO_PC[15:8] R/W F6h* (DTO_PC), the IF frequency for the picture carrier
0Bh
DTO_PC_HIGH 7 to 0 DTO_PC[23:16] R/W 92h* demodulation can be set. This function is
implemented for general purpose applications which
are different from nominal TV standards. It can also
be used for debugging purposes. The DTO_PC is
part of the picture carrier PLL. To set the DTO_PC
value to a certain PC input frequency (fIF), please
use the following formula:
DTO_PC = -1--3---.--15---3-M--.-5--H---M--z---H-â---z--f---I--F- Ã 224 . If e.g. the IF
picture carrier input frequency is 5.75 MHz
(M/N standard), one gets 92 F685h as result for
DTO_PC.
Table 22. DTO_SC_LOW, DTO_SC_MID and DTO_SC_HIGH register (address 0Ch to 0Eh) bit description
Legend: * = default value.
Address Register
Bit Symbol
Access Value Description
0Ch
DTO_SC_LOW 7 to 0 DTO_SC[7:0] R/W 55h* The DTO_SC is part of the FM/AM mono sound
0Dh
DTO_SC_MID 7 to 0 DTO_SC[15:8] R/W 55h* demodulator. DTO_SC is calculated in the same
way as DTO_PC (described above). In case of
0Eh
DTO_SC_HIGH 7 to 0 DTO_SC[23:16] R/W 55h* M/N standard (sound carrier at 4.5 MHz), one gets
55 5555h for DTO_SC.
TDA8295_1
Product data sheet
Rev. 01 â 4 February 2008
© NXP B.V. 2008. All rights reserved.
27 of 77
|
▷ |