English
Language : 

TDA6650ATT Datasheet, PDF (25/54 Pages) NXP Semiconductors – 5 V mixer/oscillator and low noise PLL synthesizer for hybrid terrestrial tuner (digital and analog)
NXP Semiconductors
TDA6650ATT; TDA6651ATT
5 V mixer/oscillator and low noise PLL synthesizer
Table 20. Characteristics …continued
VCCA = VCCD = 5 V; Tamb = 25 °C; values are given for an asymmetrical IF output loaded with a 75 Ω load or with a
symmetrical IF output loaded with 1.25 kΩ; positive currents are entering the IC and negative currents are going out of the IC;
the performances of the circuits are measured in the measurement circuits Figure 27 and 28 for digital application or in the
measurement circuits Figure 29 and 30 for hybrid application; unless otherwise specified.
Symbol Parameter
Conditions
Min
Typ
Max Unit
∆fosc(T)
oscillator frequency drift ∆T = 25 °C; VCC = 5 V with
with temperature
compensation
[9] -
900
-
kHz
Φosc(dig)
phase noise, carrier to TDA6650ATT/C3/S2;
sideband noise in digital TDA6651ATT/C3/S2;
application
TDA6651ATT/C3/S3
±1 kHz frequency offset;
fcomp = 4 MHz;
see Figure 8, 27 and 28
82
90
-
dBc/Hz
±10 kHz frequency offset; worst
case in the frequency range;
see Figure 9, 27 and 28
87
94
-
dBc/Hz
±100 kHz frequency offset; worst
case in the frequency range;
see Figure 10, 27 and 28
104
115
-
dBc/Hz
±1.4 MHz frequency offset; worst
-
case in the frequency range;
see Figure 27 and 28
117
-
dBc/Hz
Φosc(hyb)
phase noise, carrier to
sideband noise in hybrid
application
TDA6650ATT/C3; TDA6651ATT/C3
±1 kHz frequency offset;
fcomp = 4 MHz; see Figure 11, 29
and 30
75
81
-
dBc/Hz
±10 kHz frequency offset; worst
case in the frequency range;
see Figure 12, 29 and 30
85
92
-
dBc/Hz
±100 kHz frequency offset; worst
case in the frequency range;
see Figure 13, 29 and 30
104
115
-
dBc/Hz
±1.4 MHz frequency offset; worst
-
case in the frequency range;
see Figure 29 and 30
117
-
dBc/Hz
RSCp-p
ripple susceptibility of VCC = 5 V ± 5 %; worst case in the [10] 15
200
-
mV
VCC (peak-to-peak
frequency range; ripple frequency
value)
500 kHz
Mid band oscillator
fosc
oscillator operating
frequency
222
-
522.143 MHz
oscillator frequency
[7] 276
-
522.143 MHz
∆fosc(V)
oscillator frequency shift
with supply voltage
[8] -
300
-
kHz
∆fosc(T)
oscillator frequency drift ∆T = 25 °C; VCC = 5 V with
with temperature
compensation
[9] -
1500 -
kHz
TDA6650ATT_6651ATT_2
Product data sheet
Rev. 02 — 2 February 2007
© NXP B.V. 2007. All rights reserved.
25 of 54