DS90C2501 Datasheet, PDF (43/48 Pages) National Semiconductor (TI) – Transmitter with built-in scaler for LVDS Display Interface (LDI)

Applications Information (Continued)
3. To configure for single pixel in to dual pixel out application
using the DS90C2501 for Single-In-Single-Out operation,
see Table 10. The “DUAL” pin must be set to Gnd. In this
mode, outputs A0-to-A7, and CLK1, CLK2 are enabled.
TABLE 11. Connection for SIDO Operation
From DS90C2501
D0
D1
D2
D3
D4
D5
D6
D7
D8
D9
D10
D11
D12 to D23
CLKINP
CLKINM
DE
HSYNC
VSYNC
DUAL
EDGE
BAL
A0
A1
A2
ID0
ID1
ID2
ID3
RES1
RES2
RES3
RES4
TST1
TST2
TST3
S2Cclk
S2Cdat
REFCLK1
COLOR
PD
RSETN
VREF
To GMCH
RGB data signal connection
DVOxDATA0
DVOxDATA1
DVOxDATA2
DVOxDATA3
DVOxDATA4
DVOxDATA5
DVOxDATA6
DVOxDATA7
DVOxDATA8
DVOxDATA9
DVOxDATA10
DVOxDATA11
GND
DVOxCLKOUT1
DVOxCLKOUT0
DVOxBLANK
DVOxHSYNC
DVOxVYSNC
connection for other pins
1_⁄2VCC
GND
GND
Pull Up/Pull Down, Based on Device Address
Pull Up/Pull Down, Based on Device Address
Pull Up/Pull Down, Based on Device Address
Pull Up/Pull Down, Based on Panel ID
Pull Up/Pull Down, Based on Panel ID
Pull Up/Pull Down, Based on Panel ID
Pull Up/Pull Down, Based on Panel ID
GND
GND
GND
GND
GND
GND
GND
I2CCLK
I2CDATA
3V 14.31818MHz
GND
DVCC or equivalent
DVCC or equivalent
1_{⁄2VDDQ of GMCH}
43
www.national.com