UPD70F3114 Datasheet, PDF (690/692 Pages) NEC – 32-Bit Single-Chip Microcontrollers

APPENDIX D REVISION HISTORY
(5/7)
Edition
Major Revision up to Previous Edition
Applied to:
3rd Addition of description and Caution to 6.3.4 DMA addressing control registers 0 to 3
CHAPTER 6 DMA
(DADC0 to DADC3)
FUNCTIONS (DMA
Addition of description and Caution to and modification of bit description in 6.3.5 DMA channel ^CONTROLLER)
control registers 0 to 3 (DCHC0 to DCHC3)
Addition of description to 6.3.6 DMA disable status register (DDIS)
Addition of description to 6.3.7 DMA restart register (DRST)
Addition of Caution to 6.6.1 Two-cycle transfer
Addition of description to Remark in 6.13 Forcible Termination
Modification of description in 6.14 (3) Times related to DMA transfer
Addition of Caution to 7.3.4 Interrupt control register (xxICn)
Addition of Caution to 7.3.6 In-service priority register (ISPR)
Modification of description in Figure 7-14 Pipeline Operation at Interrupt Request
Acknowledgment (Outline)
CHAPTER 7
INTERRUPT/
EXCEPTION
PROCESSING
FUNCTION
Modification of description in Table 9-2 Operation Modes of Timer 0
Modification of description in Table 9-4 Operation Modes of Timer 0 (TM0n)
Modification of description in Remark in 9.1.6 (2) PWM mode 0: Triangular wave modulation
(right-left symmetric waveform control)
CHAPTER 9
TIMER/COUNTER
FUNCTION (REAL-
TIME PULSE UNIT)
Modification of Figures 9-15, 9-17 to 9-20, 9-22 to 9-30, and 9-32 to 9-35
Modification of maximum transfer rate in 10.2.1 Features
Addition of description to Table 10-3 Baud Rate Generator Setting Data
CHAPTER 10
SERIAL INTERFACE
FUNCTION
Addition of Caution to 12.2 (1) Functions of each port
CHAPTER 12
PORT FUNCTIONS
Addition of description to 15.2 (2) Off-board programming
CHAPTER 15
FLASH MEMORY
(µPD70F3114)
Addition of CHAPTER 16 ELECTRICAL SPECIFICATIONS
CHAPTER 16
ELECTRICAL
SPECIFICATIONS
Addition of CHAPTER 17 PACKAGE DRAWINGS
CHAPTER 17
PACKAGE
DRAWINGS
Addition of CHAPTER 18 RECOMMENDED SOLDERING CONDITIONS
CHAPTER 18
RECOMMENDED
SOLDERING
CONDITIONS
Addition of APPENDIX A NOTES ON TARGET SYSTEM DESIGN
APPENDIX A
NOTES ON TARGET
SYSTEM DESIGN
Modification of description in C.2 Instruction Set (Alphabetical Order)
APPENDIX C
INSTRUCTION SET
LIST
Addition of APPENDIX D INDEX
APPENDIX D
INDEX
Addition of APPENDIX E REVISION HISTORY
APPENDIX E
REVISION HISTORY
690
User's Manual U15195EJ5V0UD