MC68HC12D60 Datasheet, PDF (407/432 Pages) Motorola, Inc – Advance Information - Rev 4.0

Freescale Semiconductor, Inc.
Advance Information — 68HC(9)12D60
Section 23. Appendix: 68HC912D60A EEPROM
23.1 Contents
23.2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 407
23.3 EEPROM Programmer’s Model . . . . . . . . . . . . . . . . . . . . . . .408
23.4 EEPROM Control Registers . . . . . . . . . . . . . . . . . . . . . . . . . . 409
23.5 Program/Erase Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . .415
23.6 Shadow Word Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 415
23.7 Programming EEDIVH and EEDIVL Registers. . . . . . . . . . . . 416
23.2 Introduction
The 68HC912D60A EEPROM nonvolatile memory is arranged in a 16-
bit configuration. The EEPROM array may be read as either bytes,
aligned words or misaligned words. Access times are one bus cycle for
byte and aligned word access and two bus cycles for misaligned word
operations.
Programming is by byte or aligned word. Attempts to program or erase
misaligned words will fail. Only the lower byte will be latched and
programmed or erased. Programming and erasing of the user EEPROM
can be done in normal modes.
Each EEPROM byte or aligned word must be erased before
programming. The EEPROM module supports byte, aligned word, row
(32 bytes) or bulk erase, all using the internal charge pump. The erased
state is $FF. The EEPROM module has hardware interlocks which
protect stored data from corruption by accidentally enabling the
program/erase voltage. Programming voltage is derived from the
internal V_DD supply with an internal charge pump.
68HC(9)12D60 — Rev 4.0
MOTOROLA
Appendix: 68HC912D60A EEPROM
For More Information On This Product,
Go to: www.freescale.com
Advance Information
407