CCU3000 Datasheet, PDF (62/77 Pages) Micronas – Central Control Unit

CCU 3000, CCU 3000-I
CCU 3001, CCU 3001-I
7. Addendum: CCU 3000 1 µm Version
As the 1 µm version of the CCU has faster pin signal drivers than the 1.2 µm version, it may be programmed to work
in a kind of “slow mode”, i.e.: the current of the pin driver transistors in that mode is limited to 35 to 40%. In this default
mode it is compatible with the 1.2 µm version.
020EH
Bit
7 to 3
2
1
0
Fast/Slow Register
Reset
Read
x
x
0
x
0
x
0
x
Write
x
Port 6: 0 = slow, 1 = fast
Ports 5, 7, 8, Timers 1, 2, 3, IR,
IM bus: 0 = slow, 1 = fast
Ports 1, 2, 3, 4,: 0 = slow, 1 = fast
7.1. Electrical Characteristics
7.1.1. Absolute Maximum Ratings
Symbol
Parameter
Voltages
V_DD
V_I
Currents
Supply Voltage
Input Voltage on any pin
I_DD
Supply Current
I_STBY
Standby Current
I_I
Input Current
I_O
Output Current
I_O
Output Current
Temperatures
T_A
Ambient Temperature under
Bias
T_s
Power
Storage Temperature
P_max
Power Dissipation
Pin No. Min.
1
–0.5
1 to 68 –0.3
1
–50
5
–280
7 to 68 –2
7 to 60 –5
61 to 68
–
–10
–
–40
–
Max.
Unit
Test Conditions
6.5
V_DD+0.3
80
50
2
5
30
V
V
mA
mA
mA
mA
(except Port 6)
mA
(Port 6 only)
80
°C
125
°C
1210
800
mW
T_A ≤ 70 °C, 68-pin PLCC
mW
T_A ≤ 70 °C, 64-pin SDIP
Stresses beyond those listed in the “Absolute Maximum Ratings” may cause permanent damage to the device. This
is a stress rating only. Functional operation of the device at these or any other conditions beyond those indicated in the
“Recommended Operating Conditions/Characteristics” of this specification is not implied. Exposure to absolute maxi-
mum ratings conditions for extended periods may affect device reliability.
62
MICRONAS INTERMETALL