PIC16F716-I-P Datasheet, PDF (97/136 Pages) Microchip Technology – 8-bit Flash-based Microcontroller with A/D Converter and Enhanced Capture/Compare/PWM

PIC16F716
12.3 DC Characteristics: PIC16F716 (Extended)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +125°C
Param
No.
Sym
Characteristic
Min Typ† Max Units VDD
Conditions
VDD Supply Voltage
D001
3.0 — 5.5 V —
IDD Supply Current
D010E
— 21 28 μA 3.0 FOSC = 32 kHz
— 38 63.7 μA 5.0 ^{LP Oscillator mode}
D011E
— 182 250 μA 3.0 FOSC = 1 MHz
— 293 370 μA 5.0 ^{XT Oscillator mode}
D012E
— 371 470 μA 3.0 FOSC = 4 MHz
— 668 780 μA 5.0 ^{XT Oscillator mode}
D013E
— 2.6 2.9 mA 4.5 FOSC = 20 MHz
— 3 3.3 mA 5.0 ^{HS Oscillator mode}
IPD Power-down Base Current
D020E
— 0.1 11 μA 3.0 WDT, BOR and T1OSC: disabled
— 0.2 15 μA 5.0
Peripheral Module Current⁽¹⁾
D021E
— 2 19 μA 3.0 WDT Current
— 9 22 μA 5.0
D022E
— 37 60 μA 3.0
— 40 71 μA 4.5 BOR Current
— 45 76 μA 5.0
D025E
— 2.6 20 μA 3.0 T1OSC Current
— 3.0 25 μA 5.0
† Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
Note 1: The peripheral current is the sum of the base IDD or IPD and the additional current consumed when this
peripheral is enabled. The peripheral “Δ” current can be determined by subtracting the base IDD or IPD
current from this limit.
© 2007 Microchip Technology Inc.
DS41206B-page 95