PIC16F716-I-P Datasheet, PDF (96/136 Pages) Microchip Technology – 8-bit Flash-based Microcontroller with A/D Converter and Enhanced Capture/Compare/PWM

PIC16F716
12.2 DC Characteristics: PIC16F716 (Industrial)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C
Param
No.
Sym
Characteristic
Min Typ† Max Units VDD
Conditions
VDD Supply Voltage
D001
2.0 — 5.5 V —
IDD Supply Current
D010
— 14 17 μA 2.0 FOSC = 32 kHz
— 23 28 μA 3.0 ^{LP Oscillator mode}
— 45 63.7 μA 5.0
D011
— 120 160 μA 2.0 FOSC = 1 MHz
— 180 250 μA 3.0 ^{XT Oscillator mode}
— 290 370 μA 5.0
D012
— 220 300 μA 2.0 FOSC = 4 MHz
— 350 470 μA 3.0 ^{XT Oscillator mode}
— 600 780 μA 5.0
D013
— 2.1 2.9 mA 4.5 FOSC = 20 MHz
— 2.5 3.3 mA 5.0 ^{HS Oscillator mode}
IPD Power-down Base Current
D020
— 0.1 0.8 μA 2.0 WDT, BOR and T1OSC:
— 0.1 0.85 μA 3.0 ^disabled
—
Peripheral Module Current⁽¹⁾
0.2 2.7 μA 5.0
D021
— 1 2.0 μA 2.0 WDT Current
— 2 3.5 μA 3.0
— 9 13.5 μA 5.0
D022
— 37 50 μA 3.0 BOR Current
— 40 55 μA 4.5
— 45 60 μA 5.0
D025
— 1.8 6 μA 2.0 T1OSC Current
— 2.6 7.5 μA 3.0
— 3.0 9 μA 5.0
† Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
Note 1: The peripheral current is the sum of the base IDD or IPD and the additional current consumed when this
peripheral is enabled. The peripheral “Δ” current can be determined by subtracting the base IDD or IPD
current from this limit.
DS41206B-page 94
© 2007 Microchip Technology Inc.