PIC16F676-I Datasheet, PDF (89/132 Pages) Microchip Technology – 14-Pin, Flash-Based 8-Bit CMOS Microcontrollers

PIC16F630/676
12.2 DC Characteristics: PIC16F630/676-I (Industrial)
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40C  TA  +85C for industrial
Param
No.
Device Characteristics
Min Typ† Max Units
VDD
Conditions
Note
D010
D011
D012
Supply Current (IDD)
— 9 16 A
— 18 28 A
— 35 54 A
— 110 150 A
— 190 280 A
— 330 450 A
— 220 280 A
— 370 650 A
2.0 FOSC = 32 kHz
3.0 ^{LP Oscillator Mode}
5.0
2.0 FOSC = 1 MHz
3.0 ^{XT Oscillator Mode}
5.0
2.0 FOSC = 4 MHz
3.0 ^{XT Oscillator Mode}
D013
D014
D015
— 0.6 1.4 mA
— 70 110 A
— 140 250 A
— 260 390 A
— 180 250 A
— 320 470 A
— 580 850 A
— 340 450 A
— 500 780 A
5.0
2.0 FOSC = 1 MHz
3.0 ^{EC Oscillator Mode}
5.0
2.0 FOSC = 4 MHz
3.0 ^{EC Oscillator Mode}
5.0
2.0 FOSC = 4 MHz
3.0 ^{INTOSC Mode}
D016
D017
— 0.8 1.1 mA
— 180 250 A
— 320 450 A
— 580 800 A
— 2.1 2.95 mA
— 2.4 3.0 mA
5.0
2.0 FOSC = 4 MHz
3.0 ^{EXTRC Mode}
5.0
4.5 FOSC = 20 MHz
5.0 ^{HS Oscillator Mode}
† Data in “Typ” column is at 5.0V, 25C unless otherwise stated. These parameters are for design guidance
only and are not tested.
Note 1: The test conditions for all IDD measurements in Active Operation mode are: OSC1 = external square wave,
from rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern, and temperature also have
an impact on the current consumption.
 2010 Microchip Technology Inc.
DS40039F-page 89