PIC16F676-I Datasheet, PDF (88/132 Pages) Microchip Technology – 14-Pin, Flash-Based 8-Bit CMOS Microcontrollers

PIC16F630/676
12.1 DC Characteristics: PIC16F630/676-I (Industrial), PIC16F630/676-E (Extended)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
Sym
Characteristic
Min Typ† Max Units
Conditions
VDD
D001
D001A
D001B
D001C
D001D
D002 VDR
Supply Voltage
RAM Data Retention
Voltage⁽¹⁾
2.0 — 5.5
2.2 — 5.5
2.5 — 5.5
3.0 — 5.5
4.5 — 5.5
1.5* — —
FOSC < = 4 MHz:
V PIC16F630/676 with A/D off
V PIC16F676 with A/D on, 0°C to +125°C
V PIC16F676 with A/D on, -40°C to +125°C
V 4 MHZ < FOSC < = 10 MHz
V
V Device in Sleep mode
D003
VPOR
VDD Start Voltage to
ensure internal Power-on
Reset signal
— VSS —
V See section on Power-on Reset for details
D004 SVDD
VDD Rise Rate to ensure 0.05* —
internal Power-on Reset
signal
— V/ms See section on Power-on Reset for details
D005
VBOD
— 2.1 — V
* These parameters are characterized but not tested.
† Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
Note 1: This is the limit to which VDD can be lowered in Sleep mode without losing RAM data.
DS40039F-page 88
 2010 Microchip Technology Inc.