PIC16F676-I Datasheet, PDF (107/132 Pages) Microchip Technology – 14-Pin, Flash-Based 8-Bit CMOS Microcontrollers

PIC16F630/676
13.0 DC AND AC CHARACTERISTICS GRAPHS AND TABLES
The graphs and tables provided in this section are for design guidance and are not tested.
In some graphs or tables, the data presented are outside specified operating range (i.e., outside specified VDD
range). This is for information only and devices are ensured to operate properly only within the specified range.
The data presented in this section is a statistical summary of data collected on units from different lots over a period
of time and matrix samples. “Typical” represents the mean of the distribution at 25°C. “Max” or “min” represents
(mean + 3) or (mean - 3) respectively, where  is standard deviation, over the whole temperature range.
FIGURE 13-1:
TYPICAL IPD vs. VDD OVER TEMP (-40°C TO +25°C)
Typical Baseline IPD
6.0E-09
5.0E-09
4.0E-09
-40
3.0E-09
0
25
2.0E-09
1.0E-09
0.0E+00
2
2.5
3
3.5
4
4.5
5
5.5
VDD (V)
FIGURE 13-2:
TYPICAL IPD vs. VDD OVER TEMP (+85°C)
Typical Baseline IPD
3.5E-07
3.0E-07
2.5E-07
2.0E-07
85
1.5E-07
1.0E-07
5.0E-08
0.0E+00
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
VDD (V)
 2010 Microchip Technology Inc.
DS40039F-page 107