PIC16F72-E Datasheet, PDF (24/136 Pages) Microchip Technology – 28-Pin, 8-Bit CMOS FLASH Microcontoller with A/D Converter

PIC16F72
TABLE 3-1: PORTA FUNCTIONS
Name
Bit# Buffer Function
RA0/AN0
bit 0 TTL Input/output or analog input.
RA1/AN1
bit 1 TTL Input/output or analog input.
RA2/AN2
bit 2 TTL Input/output or analog input.
RA3/AN3/VREF bit 3 TTL Input/output or analog input or VREF.
RA4/T0CKI
bit 4
ST Input/output or external clock input for Timer0. Output is open drain type.
RA5/AN4/SS
bit 5 TTL Input/output or analog input or slave select input for synchronous serial port.
Legend: TTL = TTL input, ST = Schmitt Trigger input
TABLE 3-2: SUMMARY OF REGISTERS ASSOCIATED WITH PORTA
Address Name
Bit 7 Bit 6 Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Value on
POR, BOR
Value on
all other
RESETS
05h
PORTA — — RA5 RA4 RA3 RA2 RA1 RA0 --0x 0000 --0u 0000
85h
TRISA
— — PORTA Data Direction Register
--11 1111 --11 1111
9Fh
ADCON1 — —
—
—
— PCFG2 PCFG1 PCFG0 ---- -000 ---- -000
Legend: x = unknown, u = unchanged, - = unimplemented locations read as ‘0’.
Shaded cells are not used by PORTA.
Note:
When using the SSP module in SPI Slave mode and SS enabled, the A/D Port Configuration Control bits
(PCFG2:PCFG0) in the A/D Control Register (ADCON1) must be set to one of the following configurations:
100, 101, 11x.
DS39597C-page 22
© 2007 Microchip Technology Inc.