PIC24F08KA102-I Datasheet, PDF (231/278 Pages) Microchip Technology – 20/28-Pin General Purpose, 16-Bit Flash Microcontrollers with nanoWatt XLP Technology

PIC24F16KA102 FAMILY
29.2 AC Characteristics and Timing Parameters
The information contained in this section defines the PIC24F16KA102 family AC characteristics and timing parameters.
TABLE 29-17: TEMPERATURE AND VOLTAGE SPECIFICATIONS – AC
AC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  TA  +125°C for Extended
Operating voltage VDD range as described in Section 29.1 “DC Characteristics”.
FIGURE 29-4:
LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS
Load Condition 1 – for all pins except OSCO
Load Condition 2 – for OSCO
VDD/2
RL
Pin
CL
VSS
Pin
CL
VSS
RL = 464
CL = 50 pF for all pins except OSCO
15 pF for OSCO output
TABLE 29-18: CAPACITIVE LOADING REQUIREMENTS ON OUTPUT PINS
Param
No.
Symbol
Characteristic
Min Typ⁽¹⁾ Max Units
Conditions
DO50 COSC2 OSCO/CLKO pin
—
— 15 pF In XT and HS modes when
external clock is used to drive
OSCI
DO56 CIO
DO58 CB
All I/O Pins and OSCO
SCLx, SDAx
—
— 50 pF EC mode
—
— 400 pF In I²C™ mode
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
 2008-2011 Microchip Technology Inc.
DS39927C-page 231