PIC24F08KA102-I Datasheet, PDF (221/278 Pages) Microchip Technology – 20/28-Pin General Purpose, 16-Bit Flash Microcontrollers with nanoWatt XLP Technology

PIC24F16KA102 FAMILY
TABLE 29-6: DC CHARACTERISTICS: OPERATING CURRENT (IDD) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  TA  +125°C for Extended
Parameter No. Typical⁽¹⁾
Max
Units
Conditions
IDD Current⁽²⁾
DC31
28
-40°C
DC31a
DC31b
8
28
28
A
+25°C
+60°C
1.8V
DC31c
28
+85°C
DC31d
55
-40°C
LPRC (31 kHz)
DC31e
55
+25°C
DC31f
15
55
A
+60°C
3.3V
DC31g
55
+85°C
DC31h
250
+125°C
Note 1: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only and
are not tested.
2: Operating Parameters:
• EC mode with clock input driven with a square wave rail-to-rail
• I/Os are configured as outputs, driven low
• MCLR – VDD
• WDT FSCM is disabled
• SRAM, program and data memory are active
• All PMD bits are set except for modules being measured
 2008-2011 Microchip Technology Inc.
DS39927C-page 221