PIC24F08KA102-I Datasheet, PDF (108/278 Pages) Microchip Technology – 20/28-Pin General Purpose, 16-Bit Flash Microcontrollers with nanoWatt XLP Technology

PIC24F16KA102 FAMILY
REGISTER 10-3: PMD1: PERIPHERAL MODULE DISABLE REGISTER 1
U-0
U-0
R/W-0
R/W-0
R/W-0
U-0
U-0
—
—
T3MD
T2MD
T1MD
—
—
bit 15
U-0
—
bit 8
R/W-0
I2C1MD
bit 7
R/W-0
U2MD
R/W-0
U1MD
U-0
R/W-0
U-0
—
SPI1MD
—
U-0
R/W-0
—
ADC1MD
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
bit 13
bit 12
bit 11
bit 10-8
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2-1
bit 0
Unimplemented: Read as ‘0’
T3MD: Timer3 Module Disable bit
1 = Timer3 module is disabled. All Timer3 registers are held in Reset and are not writable.
0 = Timer3 module is enabled
T2MD: Timer2 Module Disable bit
1 = Timer2 module is disabled. All Timer2 registers are held in Reset and are not writable.
0 = Timer2 module is enabled
T1MD: Timer1 Module Disable bit
1 = Timer1 module is disabled. All Timer1 registers are held in Reset and are not writable.
0 = Timer1 module is enabled
Unimplemented: Read as ‘0’
I2C1MD: I2C1 Module Disable bit
1 = I2C1 module is disabled. All I2C1 registers are held in Reset and are not writable.
0 = I2C1 module is enabled
U2MD: UART2 Module Disable bit
1 = UART2 module is disabled. All UART2 registers are held in Reset and are not writable.
0 = UART2 module is enabled
U1MD: UART1 Module Disable bit
1 = UART1 module is disabled. All UART1 registers are held in Reset and are not writable.
0 = UART1 module is enabled
Unimplemented: Read as ‘0’
SPI1MD: SPI1 Module Disable bit
1 = SPI1 module is disabled. All SPI1 registers are held in Reset and are not writable.
0 = SPI1 module is enabled
Unimplemented: Read as ‘0’
ADC1MD: A/D Module Disable bit
1 = A/D module is disabled. All A/D registers are held in Reset and are not writable.
0 = A/D module is enabled
DS39927C-page 108
 2008-2011 Microchip Technology Inc.