PIC16LF819-I Datasheet, PDF (21/176 Pages) Microchip Technology – Enhanced Flash Microcontrollers with nanoWatt Technology

PIC16F818/819
2.2.2.4 PIE1 Register
This register contains the individual enable bits for the
peripheral interrupts.
Note: Bit PEIE (INTCON<6>) must be set to
enable any peripheral interrupt.
REGISTER 2-4:
PIE1: PERIPHERAL INTERRUPT ENABLE REGISTER 1 (ADDRESS 8Ch)
U-0
R/W-0
U-0
U-0
R/W-0 R/W-0 R/W-0 R/W-0
—
ADIE
—
—
SSPIE CCP1IE TMR2IE TMR1IE
bit 7
bit 0
bit 7
bit 6
bit 5-4
bit 3
bit 2
bit 1
bit 0
Unimplemented: Read as ‘0’
ADIE: A/D Converter Interrupt Enable bit
1 = Enables the A/D converter interrupt
0 = Disables the A/D converter interrupt
Unimplemented: Read as ‘0’
SSPIE: Synchronous Serial Port Interrupt Enable bit
1 = Enables the SSP interrupt
0 = Disables the SSP interrupt
CCP1IE: CCP1 Interrupt Enable bit
1 = Enables the CCP1 interrupt
0 = Disables the CCP1 interrupt
TMR2IE: TMR2 to PR2 Match Interrupt Enable bit
1 = Enables the TMR2 to PR2 match interrupt
0 = Disables the TMR2 to PR2 match interrupt
TMR1IE: TMR1 Overflow Interrupt Enable bit
1 = Enables the TMR1 overflow interrupt
0 = Disables the TMR1 overflow interrupt
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared x = Bit is unknown
 2004 Microchip Technology Inc.
DS39598E-page 19