PIC16F628-20P Datasheet, PDF (145/170 Pages) Microchip Technology – FLASH-Based 8-Bit CMOS Microcontroller

PIC16F62X
18.0 DC AND AC
CHARACTERISTICS GRAPHS
AND TABLES
In some graphs or tables, the data presented is outside
specified operating range (i.e., outside specified VDD
range). This is for information only and devices are
ensured to operate properly only within the specified
range.
The data presented in this section is a statistical
summary of data collected on units from different lots
over a period of time and matrix samples. 'Typical'
represents the mean of the distribution at 25°C. 'max or
min.' represents (mean + 3σ) or (mean - 3σ)
respectively, where σ is standard deviation, over the
whole temperature range.
Note:
The graphs and tables provided in this sec-
tion are for design guidance and are not
tested.
FIGURE 18-1:
6
TYPICAL IDD VS FOSC OVER VDD – HS MODE
Typical IDD vs FOSC over VDD
(HS mode)
Typical: statistical mean @ 25°C
Maximum: mean + 3σ (-40°C to 125°C)
Minimum: mean – 3σ (-40°C to 125°C)
5
4
5.5V
5.0V
3
4.5V
2
4.0V
1
0
4
6
8
10
12
14
16
18
20
FOSC (MHz)
 2003 Microchip Technology Inc.
Preliminary
DS40300C-page 143