1-66740-1 Datasheet, PDF (84/100 Pages) Tyco Electronics – M Series Pin and Socket Connectors

AMP M Series
Pin and Socket Connectors
NOTE: All part numbers
are RoHS Compliant
Protective Hardware (Continued)
Shields, Two-Piece,
180° and 90° Cable
Exit
Material and Finish
Shields - See charts
Cable Clamp - Steel, nickel
plated
Screws - Steel, zinc plated
These Two-Piece Shields are
used to protect connectors
from dust, dirt and physical
damage and to provide strain
relief for the contacts. They
feature integral cable clamps
formed at 180° and 90° and
are available in long and short
versions. Long versions offer
pin protection as well as con-
nector protection and strain
relief. Short versions may be
used in combination with Pin
Hoods to provide pin protec-
tion.
For shielding and fastening
applications, Two-Piece Shields
are used with Jackscrews.
They may be secured to a
connector housing using other
appropriate hardware such as
Guide Pins and Sockets.
Two-Piece Shields with cable
clamps formed at 45° are
available, see page 87.
Tyco Electronics does not
recommend the use of shields
with posted connectors
because of the potential of
shorting.
C
(Short,
Assembled)
C
(Long,
Assembled)
A
(Assembled)
D
(Long)
D
(Short)
B
180° Cable Exit
C
(Assembled)
A
(Assembled)
D
(Short)
D
(Long)
B
90° Cable Exit
84
Catalog 82003
Revised 06-08
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets are
equivalent U.S. Customary Units.
Dimensions are shown for USA: 1-800-522-6752
South America: 55-11-3611-1514
reference purposes only. Canada: 1-905-470-4425
Hong Kong: 852-2735-1628
Specifications subject
Mexico: 01-800-733-8926
Japan: 81-44-844-8013
to change.
C. America: 52-55-5-729-0425 UK: 44-141-810-8967