1-66740-1 Datasheet, PDF (19/100 Pages) Tyco Electronics – M Series Pin and Socket Connectors

AMP M Series
Pin and Socket Connectors
NOTE: All part numbers
are RoHS Compliant
Cable-to-Panel (Continued)
1. Confirm that Application E (at left) most closely meets
your requirements. (Other applications are shown on
pages 10-17 and 20 through 25.)
2. Find the appropriate column for the number of positions
required.
3. Select part numbers required for the application listed
in the column below the number of positions.
If a part number is not listed for a particular item, it is
not available.
If more than one part number is listed for a particular
hardware item, choose the one which best fits your appli-
cation.
4. Dimensional information is available on the indicated
pages under description column.
5. Select Contacts: Type II (page 30), Type III+ (pages 31
through 35) or Subminiature Coaxial (pages 40, 41).
Special application housings and posted housings may be
substituted for these standard housings. See Special
Application and Posted Connectors Sections.
This cable-to-panel application utilizes locking springs, strain
relief clamps, a pin hood for pin protection and guide hard-
ware.
The 34 and 50 position connectors can be used with either
center or corner guide hardware. If center guide hardware is
used, an additional four 4-40 screws, nuts and lockwashers
are required to secure the locking springs. Corner guides
require four guide pins and four guide sockets for each mated
pair of connectors.
41
202135-2
201302-1
202135-4
201302-3
—
—
—
—
201766-1
—
200389-2
200390-9
—
—
201921-1
201922-1
—
—
—
—
50
201358-1
200277-2
201358-3
200277-4
—
—
—
201182-4
201847-1
—
200389-2
200390-9
1-200833-1
1-200835-1
201925-1
201926-1
—
—
—
—
Number of Positions
75
104
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
104 CF
—
—
—
—
1-201692-6
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
160 CF
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Component Description
} ^{Plug Block}
Receptacle Block
Phenolic
} ^{Plug Block}
Receptacle Block
Diallyl Phthalate
} ^{Plug Block}
Receptacle Block
Polyester
} _{SLohnogrt Nickel} Plated Steel
} ^{LSohnogrt Stainless} Steel
} ^{Center Male}
Center Female
Stainless Steel
Corner Male
Corner Female
Male—Nickel Plated Spring Steel
Female—Stainless Steel
Internal Open End     Nickel Plated Steel
Internal Closed End   Nickel Plated Steel
External Closed End   Al Iridite
External Closed End   Nickel Plated Steel
Standard
HOUSINGS
Pages 44 to 51
STRAIN
RELIEF
CLAMPS
Page 88
GUIDE
HARDWARE
Page 81
LOCKING SPRINGS1
Page 80
PIN HOODS
Pages 82 and 83
19
Catalog 82003
Dimensions are in millimeters
Dimensions are shown for USA: 1-800-522-6752
South America: 55-11-3611-1514
Revised 06-08
and inches unless otherwise
reference purposes only. Canada: 1-905-470-4425
Hong Kong: 852-2735-1628
specified. Values in brackets are
Specifications subject
Mexico: 01-800-733-8926
Japan: 81-44-844-8013
www.tycoelectronics.com equivalent U.S. Customary Units.
to change.
C. America: 52-55-5-729-0425 UK: 44-141-810-8967