1-66740-1 Datasheet, PDF (31/100 Pages) Tyco Electronics – M Series Pin and Socket Connectors

Type III+, Crimp,
Snap-In
AMP M Series
Pin and Socket Connectors
Signal Contacts (Continued)
.0625 +.0010
-.0020
Dia.
[ 1.588
] ^+0.025
-0.051
Pin Body ^{Spring, Stainless Steel}
NOTE: All part numbers
are RoHS Compliant
Spring, Stainless Steel
.390
[ 9.91]
Min.
Pin
Ferrule, Brass, Nickel Flash
.113 Max.
[ 2.87 ] Dia.
Pin
Socket
Material and Finish - See chart
Contact Body - Brass or phospher bronze⁷
Retention Spring - Stainless steel
Related Product Data
Application Tooling - Pages 76-79
Technical Documents
114-10004 application Specification
108-10024 Product Specification
.530 ± .010
[ 13.46 ± 0.25 ]
Socket
Contact Size 16 - Pin Diameter .062 [1.57]
(Test Current, 13 Ampere)‡
‡ Single contact, free-air test current is not to be construed as contact rating current. Use only for testing.
Refer to contact current carrying capability information on page 8.
Wire Size
Range
AWG
mm²
30-28
0.05-0.09
30-26
0.05-0.15
26-24
0.12-0.2
24-20
0.2-0.6
18-16
0.8-1.4
18-14
0.8-2.0
Ins.
Dia.
Range
.015-.030
0.38-0.76
.040-.060¹
1.02-1.52
.014-.030 ¹
0.36-0.76
.035-.055 ¹
0.89-1.40
.040-.080¹
1.02-2.03
.060-.120⁵
1.52-3.05
.080-.100¹
2.03-2.54
.080-.100 ¹
2.03-2.54
.080-.100 ¹
2.03-2.54
.110-.150⁵
2.79-3.81
Contact
Finish
Strip Form
Contact No.
Pin
Socket
Gold/Nickel² 788085-3 788088-2
Sel. Gold/Nickel³ 788085-1
Bright Tin 1-66425-2
Gold/Nickel²
66425-7
Sel. Gold/Nickel³ 66425-8
Gold/Nickel²
66393-7
Sel. Gold/Nickel³ 66393-8
Bright Tin 1-66106-5
Gold/Nickel ²
66106-7
Sel. Gold/Nickel³ 66106-8
Sel. Gold/Nickel⁴
—
Bright Tin 2-66102-5
Gold/Nickel²
66102-8
66102-9
Sel. Gold/Nickel³ _2-66102-2
Sel. Gold/Nickel⁴
—
Bright Tin 1-66564-2
788088-1
1-66424-1
66424-7
66424-8
66394-7
66394-8
1-66108-5
66108-7
66108-8
66108-1
3-66104-0
66104-8
66104-9
2-66104-3
66104-1
1-66563-1
Sel. Gold/Nickel³ 66564-8
Bright Tin 1-66332-4
Gold/Nickel ²
66332-7
Sel. Gold/Nickel³ 66332-8
Sel. Gold/Nickel⁴
—
Bright Tin
1-66098-9^S
1-66098-8
Gold/Nickel ²
66098-8
Sel. Gold/Nickel³ 66098-9
Sel. Gold/Nickel⁴ 66098-6
Bright Tin
Gold/Nickel ²
1-66359-4
1-66359-5⁷
66359-9
1-66359-0
Sel. Gold/Nickel³ _1-66359-27
Sel. Gold/Nickel⁴
—
Bright Tin
66597-8
Sel. Gold/Nickel³ 66597-2
66563-8
1-66331-4
66331-7
66331-8
66331-2
1-66100-9
66100-8
66100-9
—
1-66358-6
1-66358-8⁷
66358-9
1-66358-0
1-66358-3⁷
66358-1
66598-9
1-66598-0
66598-2
Loose Piece
Contact No.
Pin
Socket
—
—
788085-4 788088-3
—
—
66429-3 66428-3
66429-4 66428-4
—
—
66406-4 66405-4
1-66107-1 1-66109-7
66107-3 66109-3
66107-4 66109-4
—
66109-1
1-66103-8 1-66105-9
66103-3 66105-3
66103-4 66105-4
1-66103-2 1-66105-3
—
66105-1
66566-7 66565-7
66566-4 66565-4
1-66400-0 1-66399-0
66400-3 66399-3
66400-4 66399-4
—
66399-2
1-66099-5 1-66101-9
66099-3 66101-3
66099-4 66101-4
66099-1
—
1-66361-2 1-66360-2
66361-3
66361-4
66361-8 ⁷
—
66602-8
66602-2
66360-3
66360-4
66360-8 ⁷
66360-1
66601-9
66601-2
Tooling Part No.
Loose Piece Strip Form
Hand Tool Applicators
90716-1
567867-1***
or 567947-1***
or 680602- ***
91515-1 ⁶
466598- ***
90225-2 ⁶
91515-1 ⁶
or
58495-1*
466585-3***
466321- ***
or
466908-2***
91515-1 ⁶
or
58495-1*
91542-1 ⁶
91523-1 ⁶
or
90225-2 ⁶
466323- ***
or
466907-2***
466383-4***
or 466979-1***
or 567363- ***
466324- ***
or
466942-1***
91505-1⁶ or
91523-1 ⁶ or
58495-1*
466325- ***
or
466906-1***
91519-1⁶
91521-1 ⁶
466326- ***
or
466923-2***
466958-1***
or
567364- ***
1 _{Overall insulation crimp diameter, including crimp barrel, must not}
exceed .125 [3.18].
2_{.000015 [0.00038] gold in the mating area over .000050 [0.00127]}
min. nickel.
3_{.000030 [0.00076] gold in the mating area, with gold flash on}
remainder, over .000050 [0.00127] min. nickel.
4_{.000030 [0.00076] gold in the mating area, with gold gradient on}
remainder, over .000050 [0.00127] min. nickel.
5_{Contacts can ONLY be used in: Metrimate; CPC Series 1 (Arr. 23-}
24), Series 4 (Arr. 23-13M, 23-16M, 23-22M), and VDE connectors.
6_{To use with the 626 Pneumatic Tool: remove crimping head from Straight}
Action Hand Tool (SAHT), order SAHT Adapter Part No. 217201-1 ,
Adapter Holder P art No. 356304-1 (with ratchet) or 189928-1 (without),
and Power Unit P art No. 189721-1 (hand actuated) or 189722-1 (foot
actuated).
7_{Phosphor bronze contact body}
S_{Standard reeling of strip form contacts.}
*Commercial PRO-CRIMPER II hand tool for field repair only. Note:
Die Set can be adapted for use with 626 Pneumatic Tool System.
Insertion Tool Part No. 91002-1 (for insulation diameters .070 [1.78]
or less), No. 200893-2 (for insulation diameters .090 [2.29] max.).
Extraction Tool Part No. 305183. (Instruction Sheet 408-1216)
*** Call Technical Support for Machine Applicator Part Numbers.
31
Catalog 82003
Dimensions are in millimeters
Dimensions are shown for USA: 1-800-522-6752
South America: 55-11-3611-1514
Revised 06-08
and inches unless otherwise
reference purposes only. Canada: 1-905-470-4425
Hong Kong: 852-2735-1628
specified. Values in brackets are
Specifications subject
Mexico: 01-800-733-8926
Japan: 81-44-844-8013
www.tycoelectronics.com equivalent U.S. Customary Units.
to change.
C. America: 52-55-5-729-0425 UK: 44-141-810-8967