1-66740-1 Datasheet, PDF (52/100 Pages) Tyco Electronics – M Series Pin and Socket Connectors

AMP M Series
Pin and Socket Connectors
Posted Connectors
NOTE: All part numbers
are RoHS Compliant
Posted connectors are
furnished preloaded with
Size 16, posted contacts
(as shown on page 32)
and are specifically
designed to be wired with
hand tools and semiauto-
matic machines. The
cavity centerline spacing
is too close to accommo-
date the heads and
mandrels of fully auto-
matic machines. Post
configurations of the pre-
loaded contacts are
available for accepting
TERMI-POINT Clip and
wrap-type terminations.
Posted connector hous-
ings are made of black
phenolic or diallyl phtha-
late and are available in
sizes ranging from 6 thru
104 positions. They will
mate with correspond-
ingly sized standard
connector (except .200
[5.08] grid) housings
loaded with Size 16 crimp-
type contacts. It is not
recommended to mate
two posted connectors.
Since the preloaded
posted contacts are rigid
in the housing, mating
two posted connectors,
particularly of the larger
sizes, would be difficult.
Posted connectors can
be substituted for stan-
dard connectors in the
Connector/ Hardware
Selection Charts, pages 10
to 25.
Tyco Electronics does not recommend
the use of shields or strain relief clamps
with posted connectors because of the
potential of shorting.
52
Catalog 82003
Revised 06-08
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets are
equivalent U.S. Customary Units.
Dimensions are shown for USA: 1-800-522-6752
South America: 55-11-3611-1514
reference purposes only. Canada: 1-905-470-4425
Hong Kong: 852-2735-1628
Specifications subject
Mexico: 01-800-733-8926
Japan: 81-44-844-8013
to change.
C. America: 52-55-5-729-0425 UK: 44-141-810-8967