1-66740-1 Datasheet, PDF (23/100 Pages) Tyco Electronics – M Series Pin and Socket Connectors

AMP M Series
Pin and Socket Connectors
NOTE: All part numbers
are RoHS Compliant
Cable-to-Panel (Continued)
1. Confirm that Application G (at left) most closely meets
your requirements. (Other applications are shown on
pages 10-21 and 24, 25.)
2. Find the appropriate column for the number of positions
required.
3. Select part numbers required for the application listed
in the column below the number of positions.
If a part number is not listed for a particular item, it is
not available.
If more than one part number is listed for a particular
hardware item, choose the one which best fits your appli-
cation.
4. Dimensional information is available on the indicated
pages under description column.
5. Select Contacts: Type II (page 30), Type III+ (pages 31
through 35) or Subminiature Coaxial (pages 40, 41).
Special application housings and posted housings may be
substituted for these standard housings. See Special
Application and Posted Connectors Sections.
This cable-to-panel application utilizes locking springs,
one-piece shields, a pin hood for pin protection and guide
hardware. The shields are available with both 180° and 90°
cable exits. The 180° shields are available in a long version
which provides pin protection in lieu of a pin hood.
Do not select a long shield and a pin hood.
The 34 and 50 position connectors can be used with either
center or corner guide hardware. If center guides are used, an
additional four 4-40 screws are required to secure the locking
springs. If corner guides are used, an additional two 4-40
screws will be required to attach the shield. Corner guides
require four guide pins and four guide
sockets for each mated pair.
41
202135-2
201302-1
202135-4
201302-3
—
—
—
—
—
—
—
—
—
—
—
—
—
—
200389-2
200390-9
—
—
201921-1
201922-1
—
—
—
—
50
201358-1
200277-2
201358-3
200277-4
—
—
—
—
—
—
—
—
—
—
—
—
—
—
200389-2
200390-9
1-200833-1
1-200835-1
201925-1
201926-1
—
—
—
—
Number of Positions
75
104
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
104 CF
—
—
—
—
1-201692-6
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
160 CF
Component Description
—
—
} ^{Plug Block}
Receptacle Block
Phenolic
—
—
} ^{PRleucgepBtloacclke} _{Bloc k} ^{Diallyl Phthalate}
Standard
HOUSINGS
Pages 44 to 51
—
—
} ^{Plug Block}
Receptacle Block
Polyester
—
180° Two- ^{Al Anodized}
—
Piece Long _{Nickel Plated Steel}
—
—
180° Two-
Piece Short
—
Al Anodized
Nickel Plated Steel
Nickel Plated Cast Al
—   90° Two-Piece Long
} ^{—   90° Two-Piece Short}
—   45° Two-Piece Short
—   45° Two-Piece Deep
—
180° One-Piece Long
Nickel
Plated
Steel
SHIELDS
Pages 84 to 87
—
180° One-Piece Short
—   90° One-Piece Short
—
—
—
} ^{Center Male}
Center Female
Stainless Steel
Corner Male
—
Corner Female
GUIDE
HARDWARE
Page 81
—
Male—Nickel Plated Spring Steel
LOCKING SPRINGS1
—
Female—Stainless Steel
Page 80
—
Internal Open End     Nickel Plated Steel
—
Internal Closed End   Nickel Plated Steel _{PIN HOODS}
—
External Closed End   Al Iridite
Pages 82 and 83
—
External Closed End   Nickel Plated Steel
23
Catalog 82003
Dimensions are in millimeters
Dimensions are shown for USA: 1-800-522-6752
South America: 55-11-3611-1514
Revised 06-08
and inches unless otherwise
reference purposes only. Canada: 1-905-470-4425
Hong Kong: 852-2735-1628
specified. Values in brackets are
Specifications subject
Mexico: 01-800-733-8926
Japan: 81-44-844-8013
www.tycoelectronics.com equivalent U.S. Customary Units.
to change.
C. America: 52-55-5-729-0425 UK: 44-141-810-8967