1-66740-1 Datasheet, PDF (82/100 Pages) Tyco Electronics – M Series Pin and Socket Connectors

AMP M Series
Pin and Socket Connectors
NOTE: All part numbers
are RoHS Compliant
Protective Hardware
Pin Hoods, Internal
Open-End and Closed-
C
C
End
Material and Finish
See charts
A
A
Pin Hoods are used to
protect pin contacts that
protrude from a connector
B
housing.
B
When contacts are mixed
(pins and sockets in both
housings), an Internal Pin
Hood is used on one housing
and an External Pin Hood
(page 83) is used on the
other housing. Or a Long
Shield is used on one housing
and an External Pin Hood
must be used on the other
housing. When a housing is
loaded with all pin contacts,
an Internal or External Pin
Hood may be used—no Pin
Hood is required on the mat-
ing half.
External Open-End Pin
Hoods with flanges (page 83)
are used primarily for mount-
ing a connector with pin
contacts to a panel.
All Pin Hoods may be
secured to connector hous-
ings using other appropriate
hardware, such as Jackscrews
and Guide Pins and Sockets.
Internal Open-End
Internal Closed-End
Note: Typical Internal Open-End and Closed-End Pin Hoods are illustrated. Slight differences in configu-
ration exist for various sizes. The mounting holes and/or slots in each Pin Hood match the
mounting hole pattern of the connector housing on which the Pin Hood is used.
Pin Hoods, Internal Open-End
Connectors Used On (No. of Positions)
Dimensions
A
B
C
Material
Pin Hood
Part No. Standard Posted

Special Application
CHurirgehn t ^Mixed
High
Voltage
1.000 .500 .718
25.4 12.7 18.24
Nickel Plated
Steel
204258-6   6   6
—
—
—
1.250 .550 .718
31.75 13.97 18.24
Nickel Plated
Steel
201363-4
14
14
—
—
—
1.632 .725 .718
41.45 18.42 18.24
Nickel Plated
Steel
201785-4
26
26
—
15
—
2.000 .880 .718
50.8 22.35 18.24
Nickel Plated
Steel
201786-4
34
34
—
16
20
Pin Hoods, Internal Closed-End
Connectors Used On (No. of Positions)
Dimensions
A
B
C
Material
Pin Hood
Part No. Standard Posted

Special Application
CHurirgehn t ^Mixed
High
Voltage
2.130 .880 .687
54.1 22.35 17.45
Nickel Plated
Steel
202434-4   34   34
—
16
20
2.875 .952 .687
73.02 24.18 17.45
Nickel Plated
Steel
202394-2   50   50
—
42
—
2.765 1.310 .687
70.23 33.27 17.45
Nickel Plated
Steel
201369-4   75   75
12
—
28
2.975 1.740 .687
75.57 44.2 17.45
Nickel Plated
Steel
201364-4
104
104
—
—
—
2.975 2.040 .687
75.57 51.82 17.45
Nickel Plated
Steel
203743-4
CF160 CF CF160 CF
—
—
—
82
Catalog 82003
Revised 06-08
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets are
equivalent U.S. Customary Units.
Dimensions are shown for USA: 1-800-522-6752
South America: 55-11-3611-1514
reference purposes only. Canada: 1-905-470-4425
Hong Kong: 852-2735-1628
Specifications subject
Mexico: 01-800-733-8926
Japan: 81-44-844-8013
to change.
C. America: 52-55-5-729-0425 UK: 44-141-810-8967