1-66740-1 Datasheet, PDF (4/100 Pages) Tyco Electronics – M Series Pin and Socket Connectors

AMP M Series
Pin and Socket Connectors
NOTE: All part numbers
are RoHS Compliant
Introduction
AMP M Series connectors are contacts. A description of each
one of the most versatile and contact type is presented on
complete pin and socket con- pages 26 through 29.
nector lines available today. Application tooling for these
From the basic molded plastic ^{contacts is described on pages}
housing, a connector can be ^{90 and 91.}
built up with a wide choice of Standard connectors
contacts and hardware to
Standard connectors are com-
serve in applications ranging _{prised of unloaded housings}
from sophisticated computers, _{that accept a variety of crimp,}
medical instrumentation and _{solder and posted contacts. All}
military ground support
standard connector housings
equipment to rugged truck
will accept pins and/or sockets,
transmissions.
permitting various combina-
How this M Series
tions of contact loading.
catalog is divided
Standard connectors are
The M Series catalog is
divided into six categories:
described on pages
44 through 51.
• Application section
Posted connectors
• Contacts/Tooling
• Standard Connector
Housings
• Posted Connector Housings
• Special Application
Connector Housings
• Hardware
Posted connectors are
preloaded with post-type con-
tacts that accept
TERMI-POINT Clip or
wrap-type terminations.
All posted connectors are
described on pages 52 through
Following is a brief summary 60.
of each of the six categories. _{Special Application connec-}
Knowing what you need
tors
to meet your application
is made easy
Connectors for special applica-
tion are available in
Eight applications have been the following configurations:
illustrated with selection
• V.35
charts from pages 10 through • High Current
25. These charts will assist you • Mixed Contact Connectors
to select the appropriate con- • High Voltage
nector housing as well as the • RFI/EMI Shielded
necessary hardware. Each
• Grounding Blocks
base part number is listed in
the numerical index on pages
94, 95 in order to find com-
plete information about a
Special Application Connectors
are described on pages 61
through 77.
particular part.
The right hardware for the
Contacts of various types
entire M Series connector line
provide different functions in ^{Hardware is available to provide}
M Series connector housings ^{fastening, protection, shielding,}
guiding, strain relief and keying
Included are contacts for sig- _{capabilities for the entire}
nal and power applications, for _{M Series connector line.}
coaxial cable and posted ver- _{Application charts for properly}
sions for backpanel wiring. A _{selecting hardware are pre-}
full complement of application _{sented on pages 10 through 25.}
tooling is available to meet
Detailed information on hard-
any production requirement _{ware is located on pages 78}
for terminating the crimp-type _{through 89.}
contacts and wiring posted
4
Catalog 82003
Revised 06-08
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets are
equivalent U.S. Customary Units.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967