1-66740-1 Datasheet, PDF (30/100 Pages) Tyco Electronics – M Series Pin and Socket Connectors

AMP M Series
Pin and Socket Connectors
NOTE: All part numbers
are RoHS Compliant
Singal Contacts (Continued)
Type II, Screw Machine,
Crimp
Material
Contact Body - Brass
Retention Spring -
Stainless steel
Finish
Contact Body -
.000030 [0.00076] gold over
.000050 [0.00127] nickel.
Gold thickness controlled
on socket O.D.
Retention Spring -
Stainless steel
Pin
1.087±.010
[27.61±0.25]
.472±.0056
[11.99±0.13]
.107
[2.72]
Max. Dia.
Spring
Spring
Pin
.795±.010
[20.19±0.25]
Pin Body
.062±.001
[1.57±0.03]
Dia.
Related Product Data
Application Tooling -
Pages 76-79
Socket
Socket Body
Socket
Contact Size 16—Pin Diameter .062 [1.57] (Test Current, 13 Ampere)‡
Wire Size
Ins.
Tape Mounted
Loose Piece
Contact
Range
Dia.
Contact No.²
Contact No.
Color
AWG [mm²] ^Range1
Pin
Socket
Pin
Socket
Code

Tooling Part No.
Tape Mounted
Loose Piece
Dies for
Dies for
AMP-TAPETRONIC Pneumatic
Machine 69875 Tool System
Hand
Tool


.₀0_.3₈5₉-_-.₁0_.45₀5 _{201611-4 — 201611 -14 2016 13-15 Re d/Red 90230-17}
*
-1*91538-1**
^{28- 24 0 .08-0.20 0}1.⁴2⁸2^--^.1⁰.6⁶5^{5 — — 20133 4-14 20 1332-15 Red/Red 90249-21*}
or 601967-1*
-1***

.₂0_.49₁5_--₂.1_.71₉0 _{— — 2024 10-14 20 2411-15 Green} 1*
—
**
601967-1


24-20 0.2-0.6

.0_1.4₀0₂-_-1.0_.56₇2 _{201578-4 — 201578 -14 20158 0-15 Yell ow/Red}
91538-1**
or 58541-1*1*
90249-2
90230-1⁷
.0_1.455₀-_-.₂0_.18₆8 _{201330 -6 20132 8-9 20 1330-14 201328-15 Yellow/Red}
or 601967-1**
18 0.9-0.9
(Two) (Two)
SNuop.pInosr.t ^{— — 20272 5-14 2027 26-14 Blue — 90231-27}
or
91539-1-1**
601967-1**


.₂0_.08₃0_--₂.1_.0₆₇5 _{— — 202507 -14 2025 08-15 — —} —
90136-1**
or 601967-1**
^{18- 16 0.8-1.4 S Nuop.pInosr.t 2003—36 -6 200—33 3-8} _{,62200043 23196--1154,6} ^{20 03—33-14} _{BBlluuee//BBlluuee} ^{902—5 0-1 90231-27}
or
91539-1-1**
58541-1*
601967-1**
_{1 4 2 SNuop.pInosr.t} ^{3220121567180} --22³ 2015—68 -3 _{†,6,23021152} 76018--1⁴_13,6,† 20 15—68-1⁵ Viole—t/Blue 902—50-1
90231-2^{7 91539-1-1**}
58541-1*
— _{or 601967-1**}
1Overall _{insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18].}
2For _{AMP-TAPETRONIC Machine No. 69875, order contacts by Tape Mounted Contact No., plus packaging code “IM REEL” (5000 parts per reel).}
3Grounding _{pin is used to provide a make-first/break-last condition when mating and unmating connector halves.}
4Use _{turret TH502 (1-601967-6) with hand tool 601967-1.}
5Use _{turret TH501 (1-601967-5) with hand tool 601967-1.}
6Pin _{length is .630}±.005 _[16.002±.127_{] on these two pins.}
7Die _{Set requires “C” Head Adapter Part No. 318161-1; Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without); and Power Unit}
Part No. 189721-2 (hand actuated) or 189722-2 (foot actuated).
*Commercial PRO-CRIMPER II Hand Tool for field repair use only. Note: Die Set can be adapted for use with the 626 Pneumatic Tool System.
† Does not use Hand Tool 91539-1 or 601967-1.
‡ Single contact, free-air test current is not to be construed as contact rating current. Use only for testing. Refer to contact current carrying
capability information on page 8.
Insertion Tool Part No. 200893-2 (for insulation diameters .070 [1.78] or less).
Extraction Tool Part No. 305183
30
Catalog 82003
Revised 06-08
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets are
equivalent U.S. Customary Units.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967