N1055A Datasheet, PDF (4/19 Pages) Keysight Technologies – 35/50 GHz 2/4 Port TDR/TDT For the 86100D DCA-X Series Oscilloscope Mainframe

04 | Keysight | N1055A Remote Head Module 35/50 GHz 2/4 Port TDR/TDT - Data Sheet
Built-in ESD/EOS protection
Each remote head integrates 67-GHz diode
limiters to help protect against electrostatic
discharge (ESD) and electrical overstress
(EOS).
Adjustable edge speed
After TDR calibration the effective TDR edge
speed may be adjusted (faster or slower) to
comply with standards-based testing.
N1055A bandwidth options
–– 35 GHz ¹
–– 50 GHz
N1055A channel count options
–– 2 channels per module ²
–– 4 channels per module
High-bandwidth oscilloscope
The N1055A’s receiver can be used as an
oscilloscope to analyze waveforms and
perform precision jitter analysis
(86100D-200) on high-speed data signals.
Up to 16 channels per mainframe
Up to 16 TDR/TDT channels per 86100D
DCA-X mainframe minimize cable
reconnections and facilitate efficient near-
end crosstalk (NEXT) and far-end crosstalk
(FEXT) measurements.
Connector flexibility maximizes
signal integrity:
Choose male or female connectors to
minimize the need for adapters and cables,
which improves signal integrity and saves
money.
–– 50 GHz modules: 1.85 mm male or female
connectors
–– 35 GHz modules: 2.92 mm male or female
connectors
Note: All remote heads within a module must be
configured with the same connector type.
1.  Upgradable to 50 GHz
2.  Upgradable to 4 channel