N1055A Datasheet, PDF (13/19 Pages) Keysight Technologies – 35/50 GHz 2/4 Port TDR/TDT For the 86100D DCA-X Series Oscilloscope Mainframe

13 | Keysight | N1055A Remote Head Module 35/50 GHz 2/4 Port TDR/TDT - Data Sheet
World’s Easiest-to-Use Solution on Devices That Have up to 16 Ports
The 86100D-based system combines its powerful FlexDCA
graphical user interface with the world’s only TDR/TDT solution
that leverages accurate, easy-to-use electronic calibration (ECal)
technology. This combination provides calibrated impedance
and S-parameter results that are displayed in real-time within
the FlexDCA user interface—no external application, monitor or
computer is required.
True SOLT TDR Calibration
For users who do not need precision measurements and
prefer to perform simple, quick impedance and S-parameter
measurements on a device, a TDR/TDT calibration is not required
thanks to the high-fidelity performance of the raw hardware.
Traditional mechanical short-open-load-thru (SOLT) calibration
standards are supported, but a significant breakthrough is
achieved through the support of electronic calibration (ECal)
modules, an advanced calibration technique originally developed
for the “gold standard” in S-parameter measurements, the vector
network analyzer (VNA). A special Keysight N4694A DC-67 GHz
ECal module was developed for the DCA-TDR that enables fast
and accurate calibration and de-skew of TDR modules.
N4694A DC-67 GHz electronic calibration (ECal) modules make TDR
calibration and de-skew fast and easy.
A built-in wizard supports calibration methods using mechanical and
electronic calibration standards.