N1055A Datasheet, PDF (14/19 Pages) Keysight Technologies – 35/50 GHz 2/4 Port TDR/TDT For the 86100D DCA-X Series Oscilloscope Mainframe

14 | Keysight | N1055A Remote Head Module 35/50 GHz 2/4 Port TDR/TDT - Data Sheet
Easy set-up using graphical user interface
A graphical user interface makes it easy to configure the
instrument. Port names may also be customized using
meaningful names that relate to the device being tested
(Example: TX1+, TX1- or J1+, J1-). FlexDCA uses the custom
names when displaying signals and saving waveforms.
Built-in ESD/EOS protection
Each remote head integrates a high-performance TDR step
generator and high-bandwidth sampling into a microcircuit
located behind the connector. To protect these high-
performance components against electrostatic discharge (ESD)
and electrical overstress (EOS), each microcircuit also integrates
multiple 67-GHz diode limiters into the design. While the user
must still follow safe ESD and EOS practices, the diode limiters
offer additional protection and help protect your investment.
Configure the setup and customize connector/port names using the
graphical user interface.
Customizable displays
With the click of a button, FlexDCA can be configured to display
impedance and S-parameter waveforms the way you want using
overlapped, tiled or zoom-tiled displays.
A high-speed step generator, sampler, and diode limiter are integrated
into a proprietary microcircuit design housed in the remote head.
Zoom-tiled
Tiled
Overlapped waveform