N1914A Datasheet, PDF (2/28 Pages) Keysight Technologies – EPM Series Power Meters E-Series and 8480 Series Power Sensors

02 | Keysight | N1913A and N1914A EPM Series Power Meters / E-Series and 8480 Series Power Sensors - Data Sheet
Do More With New-Generation EPM Series Power
Meters
–– Get up to four channels¹ to speed and simplify RF average power measurements
–– Measure faster with improved measurement speed of 400 readings/sec with the
Keysight Technologies, Inc. E-Series sensors
–– View test results more easily with the industry’s first color LCD readout in an average
power meter
–– Go beyond GPIB with USB and LAN/LXI-C interfaces
–– Automate frequency/power sweep measurements with the optional external trigger
in/out feature
–– Confirm battery power with a single-button push² — and get extra operating time
with the optional spare battery
–– Easily replace existing 436A, 437B and 438A meters with optional 43x code
compatibility³
–– Enhance manufacturing test by connecting a large external monitor with the unique
VGA output option
1.  Additional two optional USB channels available (see Ordering Information, page 10)
2.  Only applicable for models with battery option (see Ordering Information, page 10)
3.  N1913A is backward compatible with the 436A and 437B, while N1914A is compatible with 438A
As signals become more complex, it becomes more difficult to make fast, accurate
power measurements. For years, you’ve depended on Keysight’s EPM Series power
meters. Today, the Keysight N1913A and N1914A EPM Series power meters are versatile,
user-friendly replacements for the E4418B/19B EPM Series. Best of all, you get these
extras for about the same price. Get consistent results and greater capability—with the
new EPM Series power meters.
Essential specifications
–– Frequency range: 9 kHz to
110 GHz
–– Power range: –70 dBm to
+44 dBm (100 pW to 25 W,
depending on the attached
power sensor)
–– Measurement speed: Up to
400 readings/sec with
E-Series sensors
–– Absolute accuracy: ± 0.02 dB
logarithmic, ± 0.5% linear
–– Relative accuracy: ± 0.04 dB
logarithmic, ± 1% linear
Bundled Intuitive BenchVue Software
The EPM Series power meters are supported by the Keysight BenchVue software (version
3.0 and above). BenchVue makes it easy to control your power meter to log data and
visualize measurements in a wide array of display options without any programming.
This software is available on the Keysight Instrument Control DVD, which is included
with each meter. You can download the latest version of the software cost free at
www.keysight.com/find/BenchVue. Upgrading to the paid BenchVue Power Meter Pro
version (BV0007A) provides unrestricted data logging.