E1993A Datasheet, PDF (2/40 Pages) Keysight Technologies – W-CDMA Mobile Test Application

Introduction
Accelerate UMTS test plan development and get your
devices to market sooner, while ensuring compliance
with TS 34.121-1 test standards.
The Keysight Technologies, Inc. E1963A W-CDMA mobile test application, when used with the
Keysight GSM, GPRS, and EGPRS applications, is the industry standard for universal mobile
telecommunications (UMTS) mobile test. Keysight’s 8960 (E5515C/E) test set provides you with a
single hardware platform that covers all the UMTS/3GPP (Third Generation Partnership Project)
radio formats: W-CDMA, HSPA, GSM, GPRS, EGPRS, and TD-SCDMA.
Exceed your calibration test time goals with the E1999A-202 fast device tune measurement.
Simultaneously calibrate your device’s transmitter (Tx) output power and receiver (Rx) input level
across level and frequency. E1999A-202 is a superset of the discontinued E1999A-201. It not only
offers the equivalent capabilities of the E1999A-201, it is enhanced to reduce the calibration test
times for W-CDMA, cdma2000^®, and 1xEV-DO wireless devices with smaller step size support
(10 ms step size versus 20 ms step size).
Reach your high-volume production goals by moving prototypes quickly into production with
this test solution’s fast and repeatable measurements, accurate characterization, and ease
of programming.
The HSPA, W-CDMA, GSM, GPRS, and EGPRS product combination delivers a complete and
integrated UMTS test solution in a single box. FM radio source, a single channel GPS source
(E1999A-206), and PESQ measurement (E1999A-301) are also added into the test box for FM
radio receiver calibration, GPS receiver calibration, and audio quality test without the need for
an external audio analyzer. This fast, one-box approach simplifies your production process and
increases your production line effectiveness.
With the most complete test functionality for 3GPP TS 34.121-1 Section 5 and 6 tests, E1963A
HSPA Options 403, 405, 413, 423, 433, and 435 provide fast, flexible measurements and options in
user equipment (UE) connectivity, giving design and manufacturing test engineers more flexibility
in creating test plans and the assurance that designs meet technology standards. Option 433 pro-
vides you with the functionality to test 42 Mbps downlink dual carrier (DC-HSDPA) and dual band
dual carrier HSDPA (DB-DC-HSDPA) throughput in RB test mode and FDD test mode connection,
and Option 435 allows validation of single and dual stream MIMO using 16QAM for a maximum
data rate of 28 Mbps or 64QAM for 42 Mbps in RB test mode and FDD test mode connection.